Specification Parameters: (Customizable according to customer requirements)
Key Performance Advantages: Easy operation with trolley in and out. Please select the trolley style according to the characteristics of the baking product (see optional items).
Inner diameter size: See the below list for details (standard sizes, special sizes available for customer customization)
Inner Material: Stainless Steel or Cold-Rolled Steel Sheet
Exterior Material: Cold-rolled steel or stainless steel plate, with surface coating (colors available, see optional items)
Frame: Channel steel angle steel integrated frame
Insulation Material: High-temperature-resistant alumina silicate wool
Bottom Load-Bearing: Channel Frame
Track: Channel track or I-beam track with external guide rail
Material of Heating Tube: Far-Infrared Stainless Steel Sheathed Heater (SHEATHED HEATER), designed for continuous operation up to 70,000-80,000 hours
Heating tube distribution: Evenly distributed on both sides of the case air ducts, top air duct, or bottom air duct, depending on the case size.
Air Distribution: Dual-channel horizontal air distribution or dual-channel high-pressure circulation air distribution
Blower Motor: High-temperature-resistant motor with long shaft and multi-blade impeller
Motor Installation: Top, Side
Door latch: Alloy bearing hinge and top-bottom buckle-type pull rod
Factory-finished Components:
1. Flatbed Trolley / Layered Trolley
2. Product Manual
3. After-sales Maintenance Warranty Card
4. Product Compliance Certificate
5. Comprehensive Tool Kit
Optional Configuration: See Optional Items
Special specifications and requirements can be customized upon request.
Performance Advantages: (Ongoing Improvement)
Blower SystemOptimized air duct design with a high-temperature-resistant fan motor and centrifugal blades, featuring a powerful turbine-style air circulation to eliminate dead spots. This ensures more even hot air distribution within the unit, leading to greater energy efficiency and quieter operation. It provides a better operating environment, with wind speed and pressure meeting testing standards and complying with domestic environmental protection requirements. Some components offer high reliability and compatibility, and are easy to install, maintain, and repair.
Heating SystemUtilizing far-infrared heating technology, with high radiation effect and faster heating speed. The heating tubes are evenly distributed, ensuring the system operates independently without affecting the control circuit. Both temperature control and power are calculated by the computer, automatically adjusting the heating output power based on the internal temperature to meet precise electrical demands. This approach is more environmentally friendly and energy-efficient.
Temperature Control SystemUtilizing a microcomputer digital display intelligent temperature controller with PID adjustment, featuring a digital timer relay, high accuracy, and clear visibility. When paired with a solid-state relay, it offers continuous adjustment capabilities. Once the temperature reaches the preset value, the relay receives the temperature controller's output signal source to control the temperature, allowing only precise floating within the PID temperature range for constant temperature action. This enhances the accuracy of the internal temperature. The circuit is equipped with an over-temperature protector. In case of a malfunctioning instrument or operational error leading to temperature exceeding the set value, the protector immediately cuts off the control power to ensure the safety of the products inside. The over-temperature protector can be adjusted within the approved range.
Insulation EffectivenessExcellent thermal insulation technology, significant sealing effect, the exterior of the box maintains the normal indoor temperature, with minimal impact on the ambient temperature.
System ProtectionLeakage protection, circuit protection, short-circuit protection, overload protection, phase sequence protection, over-temperature protection.
Electrical configuration: (Customizable to meet customer requirements)
Temperature Controller:A set of intelligent digital temperature controller for automatic temperature control, with accuracy of 0.1-1 degree, featuring PID adjustment.
Time Setting Device:HS48S-99.99 Timer Device, featuring manual/automatic on/off capabilities. It starts counting down when the temperature reaches the set value and shuts off the heating power source once it reaches the set range.
Time-Alarm DeviceAPT/AD16 type sound and light alarm device, immediate alarm upon completion of set time, manual termination alarm prompt.
Over-temperature alarm device:When the temperature exceeds the set value range, the protector immediately cuts off the control power supply.
Thermometer Device:A stainless steel PT100 platinum resistance temperature sensor device for precise temperature measurement, and a stainless steel K-type platinum resistance temperature sensor device for use with over-temperature protectors.
Circuit breaker activation:Leakage protected circuit breaker for power supply, effectively protecting certain electrical components.
Contactor:PID+SSR (optional) output ensures precise temperature control, enhancing the stability of the temperature control components and interfaces, and extending their lifespan. It guarantees uniformity of the internal temperature.
Current Voltage:220/380V, 50Hz, two-phase/three-phase four-wire and properly grounded.
Switches and indicator lights:Utilizing the Chint brand, durable and not easily damaged, available for use as per customer request or a specific brand.
Recorder:With or without paper recorders and USB, microcomputer integrated control system: optional as per customer's choice.
Equipment Operating Environment: (Please Note)
Installation Site:The ground is level, well-ventilated, with no intense vibrations around the equipment, no safety hazards, no strong magnetic fields nearby, no direct sunlight or other heat sources, no high concentration of dust, and no corrosive, flammable, or explosive materials. Adequate space for operation and maintenance must be left around the equipment.
Using Air Pressure:86-106Kpa
Environmental Requirements:Temperature range: -5 to 40 degrees Celsius, relative humidity ±85% RH.
Power Source:Customers are required to install a corresponding air or power switch with the appropriate capacity for this equipment and ensure proper grounding.
After-sales Service: (Caring deeply for our customers)
Warranty Period:From the date of delivery, our company provides 12 months of warranty for the entire machine maintenance and lifelong repair services.
Warranty Information:During the warranty period, we will provide free repair and replacement of parts. Outside the warranty period, replacement parts will be charged at the market cost price of the parts only.
After-sales service:We received a customer after-sales service call and responded within an hour. If the customer encounters issues that they cannot resolve themselves, we will arrive at the customer's site within 24 to 72 hours, depending on the distance.
Service Support:Our company offers lifetime upgrade services for the equipment's software and control system, and free technical support for the hardware components.
