Volumetric Gas Water Heater: BTR (BTRO) Series Commercial Condensing Low Nitrogen Volumetric Gas Water Heater
New condensation design, efficiency up to 105%
In traditional gas appliances, the latent heat of vaporization from the steam in the high-temperature flue gases produced by combustion is not utilized. However, the condensing volumetric gas hot water heaters, utilizing advanced condensing technology, cool the flue gases to 40~80°C, thereby fully utilizing the latent heat of vaporization of the steam. As a result, the heat output increases by approximately 15% under the same input load.
Performance Features
High-efficiency energy-saving
Top-mounted fully premixed combustion, significantly enhancing combustion efficiency. Unique spiral heat exchanger, fully absorbing the latent heat of vaporization of water vapor in flue gas, achieving a thermal efficiency of up to 106.5%.
Easy installation
Two models (indoor unit, outdoor unit), compact in size; capable of connecting for balanced exhaust, without consuming indoor air.
Secure and reliable
Electrical spark ignition, low-load start-up; featuring a four-level protection system including a temperature controller, high-temperature limit, over-temperature protection, and temperature-pressure safety valve, ensuring safe operation; pressure-bearing capacity up to 1.1 MPa.
Effectively manage fluctuations in pipeline water pressure.
Long service life
Option 1: 316L stainless steel inner tank, 316L furnace tube, 304 outer shell, food-grade stainless steel quality guaranteed, offering the inner tank enhanced durability protection.
Optional Two: Overall enameling of the main unit, resistant to acidic and alkaline water, especially anti-corrosive and anti-scaling, extending the overall service life.
Option 3: Full-body hot-dip galvanizing for the main unit, with a mature and stable galvanizing process, cost-effective, and high performance-to-cost ratio.
Low Nitrogen Environmental Protection
Two emission options: standard and low NOx. The low NOx model emits less than 30mg/m³ of NOx, meets environmental standards, and is more environmentally friendly.
The Function and Principle of Air Conditioning Distributing Water Manifold
The function of an air conditioner condensate separator is to分流 and collect condensate or wastewater from the indoor unit of an air conditioner, and to discharge it. It operates by designing a special structure that causes water vapor or droplets to adhere to the separator's surface, directing the water flow into the lower drainage pipe, thus preventing water droplets from falling inside and causing unnecessary environmental pollution and damage. Below, I will elaborate on the function and principle of the air conditioner condensate separator.
Firstly, the function of the air conditioner condensate separator is to分流 and collect condensate or wastewater generated by the indoor unit of the air conditioner for discharge. As the air conditioner operates, the indoor unit absorbs moisture from the indoor air through the air circulation system; the moisture in the air condenses into water droplets during the cooling process and is then drained out through the drainage pipes; or when there is a significant temperature difference between the inside and outside of the air conditioner, dew points form inside the unit, leading to condensate. These water droplets or condensate then enter the separator through the drainage pipes.
Next, the principle of the condensate separator mainly involves designing special structures and materials to分流and collect condensate or water droplets from the indoor unit. Generally, a condensate separator is composed of two parts: the collection section and the drainage section.
The water collection section typically features a concave structure, which is often coated or made with a special material for superhydrophilicity. This allows water droplets or condensation to rapidly spread across the surface, increasing the contact area between water and the surface, and causing them to quickly adhere to the water collector. As a result, water droplets or condensation won't fall indoors, achieving the effect of preventing dripping.
The drainage section transfers water droplets or condensate adhering to the collector surface into the lower drainage pipe. The drainage section typically consists of one or more water channels or ditches, designed with specific shapes and inclinations to guide the water droplets or condensate into the drainage pipe. Some manifold collectors are also equipped with filter meshes to trap impurities and debris in the water, preventing blockages in the drainage pipes.
In summary, the function of an air conditioner condensate separator is to分流 and collect condensate or wastewater from the indoor unit of an air conditioner. Its principle involves designing special structures and materials to adhere water vapor or droplets to the separator's surface, channeling the water flow into the lower drainage pipes, thus preventing water droplets from falling indoors and causing unnecessary environmental pollution and damage. By utilizing the air conditioner condensate separator properly, one can maintain clean and dry indoor air, enhancing the comfort of the indoor environment.
