Operations Process

Operation process

Please swipe the IC card against the card reader's recognition area; the corresponding parking space will automatically descend upon card insertion.

1. Please align the IC card with the identification area of the operator and swipe the card. The corresponding parking space of the IC card will automatically run and land.

2. Once the loading/unloading platform is in place, reverse into position. Confirm that the tires are not misaligned or on the curb, then continue reversing.

2. When the lifting carriage plate is in place, reverse to enter. Confirm that the tire is not offset or pressed, and continue to reverse.

3. Park the incoming vehicles as centrally on the vehicle deck as possible, ensuring the front wheels are positioned on the wheel stops. Then, pull the handbrake, turn off the engine, close and lock the sunroof, and secure the car doors.

3. The vehicle in storage shall be parked in the center of the vehicle plate as much as possible, and the front wheel must be parked on the front wheel alignment block. Then tighten the hand brake, turn off the engine, close the sunroof and lock the door.

4. After parking the vehicle correctly, the driver may leave. The mechanical parking space will transport the vehicle to the designated spot.

4. The driver can only leave after the car is parked correctly. Mechanical parking spaces transport vehicles to designated berths.