The Raymond mill is a new, cost-effective ultra-large-scale powder grinding equipment developed by our company based on the increasing demand for larger, lower-cost, and high-efficiency products from customers over the past few years. By absorbing the advantages of the domestic and international powder grinding industries and combining our company's decades of production experience, it has been developed through numerous research and experiments. Its introduction has filled the gap in the domestic large-scale powder grinding equipment market. Taking the TSDM2100 model as an example, processing the same material and achieving the same fineness, the energy consumption is only 4/5, the equipment investment ratio is 5/6, the infrastructure ratio is 1/3, and the labor ratio is 1/3, significantly reducing both the initial investment costs and the subsequent production costs, and has been universally recognized by customers both domestically and internationally.

Features:

1. Large output

For example, with the TS2100 model, producing the same material and fineness yields a high output.

2. Investment savings

Infrastructure and building construction are equivalent to an investment in 1 unit of 5R4119, significantly reducing the initial investment cost.

3. Long maintenance and service cycle

Due to the adoption of a fully enclosed lubrication system for the roller unit, the lubricant has been changed from grease to gear oil. This significantly improves the working environment of the bearings, effectively extending their service life, and ensures no oil leakage, thus reducing the need for refueling from every 3-5 days to once a month. This does not increase operational costs and greatly reduces the labor intensity for the operators, enhancing the equipment's utilization rate.

4. The transmission device operates smoothly with a long service life.

The drive unit has been upgraded from passive lubrication to forced lubrication, thereby preventing damage to the bearings due to lack of oil or temperature changes, extending the overall lifespan of the drive unit.

High Reliability

Wear parts like grinding rolls and rings are now made from high-chromium material instead of the previous high-manganese steel. Their service life is extended 3-5 times compared to before, enhancing equipment reliability and reducing operational costs. Additionally, with less wear, the metal content in the powder is reduced, effectively improving the quality of the finished product.

6. Low labor requirement

Unit yield is 1/3 of the labor required for the ordinary R-type mill.

7. More eco-friendly, zero pollution

Equipped with a pulse-jet dust collector, not only is the equipment pollution-free, but the entire processing area can also be dust-free.