Before the steel structure assembly, staff must familiarize themselves with the component construction drawings and relevant technical requirements, and verify the quality of the parts to be assembled according to the drawings.

2. Due to insufficient material dimensions or technical requirements for parts that need to be assembled, these components are generally pre-assembled before assembly.

3. Steel structure processing adheres to the following regulations when using mold assembly:

The site selected is level and possesses adequate strength.

When setting up the assembly of the tire mold, take into account the shrinkage amount and other processing allowances based on the characteristics of the steel structural components.

After the batch components are assembled, they undergo quality inspection. Only upon passing the inspection can the assembly process continue.

④ Components are assembled in strict accordance with the manufacturing specifications. In cases where there are concealed welds, welding is performed first, and the assembly can be covered only after passing inspection. For complex assembly parts that are difficult to weld, the method of welding while assembling can also be adopted to complete the assembly work.

⑤ To minimize deformation and streamline assembly sequences, the method of first assembling components and then assembling subassemblies can be adopted.

4. The selection of steel structure component assembly methods involves choosing techniques based on the structural characteristics and technical requirements of the components, in conjunction with the manufacturing facility's processing capabilities and machinery equipment, to ensure a method that controls assembly quality and enhances production efficiency.