Chain performance is influenced by many factors, which also significantly impact the chain's lifespan. What malfunctions might occur during the transmission process for Tangshan Chains? Below, the Tangshan Chain manufacturer addresses your concerns.

The issue of whether the parallelism of the front and rear shafts during the installation of Tangshan Chain Processing is consistent with the coplanarity of the sprockets, which depends on the correctness of the installation of the front and rear shafts and the sprockets.

Secondly, the issue of whether Tangshan chains and chain wheels work in harmony. If the Tangshan chains and chain wheels do not match well, it is often due to wear on the chains or elongation of the pitch over time due to prolonged use, and it is advisable to replace the chains and chain wheels promptly.

The third issue is the vibration phenomenon of the Tangshan chain. This occurs due to either the chain being too loose or the load being too heavy.

The Tangshan chain operates with excessive noise, caused by the non-coplanarity of the Tangshan chain wheel; the chain being too loose or too tight; insufficient lubrication between the chain wheel and the chain; and wear on the chain and chain wheel.

The fifth issue is severe wear on the shafts, primarily caused by insufficient lubrication. To prevent this from occurring, we must regularly inspect the lubricant for abrasive particles or alter the lubrication method.

Sixthly, Tangshan sprocket tooth wear: When we find significant wear on both sides of the sprocket teeth, the primary cause is poor alignment of the transmission. If the wear is excessive, replace the sprocket or reverse its installation. Here, we recommend replacing the worn-out Tangshan sprockets with Tangshan chains as a whole.