Chain performance is influenced by numerous factors, which also significantly impact the lifespan of the chain. What malfunctions might occur during the transmission process for Tangshan Chains? Below, the Tangshan Chain manufacturer addresses your concerns.

The issue of whether the parallelism of the front and rear shafts during the installation of Tangshan Chain Processing is consistent with the coplanarity of the sprockets, which depends on the correctness of the installation of the front and rear shafts and the sprockets.

The issue of whether Tangshan chains and chain gears work in harmony; if there is poor coordination between Tangshan chains and chain gears, it is often due to chain wear or elongation of the pitch over long-term use, and chains and gears should be replaced promptly.

The third issue is the vibration of Tangshan chains, which occurs due to either over-relaxation of the chains or excessive load.

The Tangshan Chain experienced excessive noise during operation, caused by misalignment of the Tangshan chain wheels; the chain being too loose or too tight; insufficient lubrication between the chain wheels and the chain; and wear on both the chain and the chain wheels.

The fifth issue is severe wear on the shafts, primarily caused by insufficient lubrication. To prevent this occurrence, we must regularly inspect the lubricant for abrasive particles or alter the lubrication method.

Six, the wear of Tangshan sprocket teeth. When we find significant wear on both sides of the sprocket teeth, the main reason is poor transmission alignment. If excessive wear occurs, replace the sprocket or reverse it. Here, we recommend replacing the worn Tangshan sprocket with the Tangshan chain as a set.