We specialize in: Reinforcement with rebar, steel plate bonding, crack reinforcement of buildings, carbon fiber reinforcement of buildings, seismic reinforcement of schools, bridge maintenance and reinforcement, tunnel reinforcement, factory building reinforcement, floor crack reinforcement, hotel renovation reinforcement, carbon fiber reinforcement of structural beams and columns, column angle steel wrapping and grouting reinforcement, etc.; and produce: rebar bonding adhesive, steel plate bonding adhesive, grouting adhesive, crack filling adhesive, carbon fiber adhesive, carbon fiber fabric, sealing adhesive, repair adhesive. We warmly welcome all to discuss and cooperate.
Cautionary Notes:
Soak the carbon fiber fabric material and resin together before use.
2. When applying carbon fiber fabric, use a brush or roller to squeeze out air bubbles between the fabric and the base material along the application direction to ensure*adhesive quality.
Do not intentionally crush carbon fiber fabric to avoid causing damage to the fabric due to excessive crushing strength.
4. Pay attention to the construction environment, and aim for temperatures between 15-25 degrees Celsius for optimal results in achieving the best construction quality.

Xi'an Carbon Fiber Reinforcement Fabric for Building Reinforcement Sales

Carbon Fiber Fabric Reinforcement Highlights: The product weight of carbon fiber fabric is relatively low. When used, it wraps around the outer surface of the component without adding excessive weight or altering the component's appearance, even enhancing its look. Carbon fiber fabric reinforcement can also be applied in multiple layers. This flexible application method maximizes the performance of the carbon fabric and is relatively straightforward.


Under normal circumstances, temperature cracks do not directly affect the use of the structure. However, if not addressed and repaired promptly, they may cause certain adverse effects on normal operation, even leading to the cracks becoming a significant issue, such as severe leakage in roofs or walls, or even the falling off of wall plaster. Generally, temperature cracks can be sealed with cement mortar, resin mortar, or cement grout.
"After discovering cracks, it is the responsibility of the planners and contractors to determine the nature of the cracks and assess whether they are structural cracks." The staff member from the Construction Quality Supervision Station said, "Once the nature of the cracks is established, the responsible party should communicate with the residents and then provide a detailed repair plan for the cracks."
1. The putty base, curing accelerator, and hardener are weighed in accordance with the specified proportions, placed into containers, and mixed evenly using a mixer.
2. Fill concave areas on the components with putty and smooth them to achieve a flat surface. When using putty for repairs, the temperature should be above -5℃ and the relative humidity should be less than 85%. After the putty is applied and scraped, any remaining uneven textures should be smoothed out with sandpaper.
3. Apply primer/Evenly coat the pre-mixed primer (adhesive) on the concrete surface to be bonded using a roller.
4. Prior to applying carbon fiber or carbon fiber materials, it is essential to acknowledge that the surface can appear dull. No construction should be carried out when the temperature is above -10℃ and the relative humidity (RH) is greater than 85% without proper methods. To prevent damage to the carbon fiber materials during transportation, storage, cutting, and application, use a steel ruler and wallpaper knife to cut the materials to the specified dimensions. The length of each piece should generally not exceed 6 meters. To avoid damage during storage, the number of materials cut should be based on the day's usage. The longitudinal joints of the carbon fiber must overlap by at least 500px. More resin should be applied to this area, and there is no need to overlap the carbon fiber laterally.

Japan Toray imported UT70-30, Japan Asahi Carbon Fiber Fabric, Huifish Carbon Fiber Reinforcement Adhesive, and Germany imported Hilti Carbon Fiber Reinforcement Adhesive manufacturers wholesale agents. Payment upon delivery. Welcome to call for consultation and negotiation! Purchasing our materials includes technical guidance services, construction plans, and construction qualifications. This information is valid for a long time, nationwide shipping, payment upon delivery. Quality guaranteed, payment upon delivery! Carbon fiber fabric supplied in all provinces, cities, and counties nationwide. Freight is borne by our factory.