Wuxi Inken Building Technology Co., Ltd. Basic Business: 1. Undertake the following engineering projects: reinforcement and strengthening of building structures: reinforced concrete beams and columns with carbon fiber, increased cross-sectional area reinforcement of beams and columns, rebar anchoring reinforcement, steel plate bonding, aramid fiber reinforcement, tunnel steel ring reinforcement, rebar anchoring, steel plate bonding, carbon fiber tape bonding, crack repair, waterproofing and leakage repair, steel structures, concrete cutting, bridge lifting, replacement of supports, bridge maintenance and reinforcement, bridge carbon fiber tape bonding, bridge underpinning, etc. 2. Product Sales: building structure adhesives, rebar bonding adhesives (both injection and bulk), steel plate bonding adhesives, carbon fiber adhesives, resins, chemical anchors, carbon fiber fabrics, grouting adhesives, joint filling adhesives, grouting materials, carbon fiber boards, etc.
Carbon Fiber Fabric Lamination Method
1. When bonding carbon fiber materials, the following conditions must be met:
2. Carbon fiber materials should be cut in accordance with regulations.
3. Temperature, air humidity, moisture content on the surface of components, etc., meet the requirements.
4. Base coating and putty achieve touch-dry condition (resin surface reaches a solid and hard consistency).
5. The type of adhesive resin should be suitable for the construction temperature. The main agent, hardener, and curing accelerator should be weighed accurately in the specified proportions, placed in containers, and mixed thoroughly with a mixer. The mixed quantity should be used up within the specified time.

Luohe 200g Carbon Fiber Fabric_ Reinforced Carbon Fiber Fabric for Sale


With the expansion of the construction industry, high-rise buildings are becoming more common, and various reinforcement methods are employed in engineering projects. Among them, steel plate reinforcement is a widely used technique, which involves the use of steel plate adhesive. What are the details that everyone should be aware of when using it?
1. Cleaning and reinforcing the surface is a top priority, an indispensable step. It requires appropriate sanding to remove the existing protective layer and apply a fresh coat. Use an air compressor or other cleaning tools to blow off the dust. Then, wipe it down. If there's high humidity, you can also dry it using an artificial heating method.
2. Next, the steel plate needs to be thoroughly cleaned. There are various methods to do so. You can use sandblasting or a wire brush for abrasion, ensuring the direction of the abrasion matches the steel's grain. Continue until the entire plate exhibits a metallic luster.
3. Next, extract the required proportion of materials. Generally, the mixture ratio of Material A to Material B is controlled at 3:1. After thorough mixing, apply the two materials to the steel plate surface. The thickness should be kept under 3mm, ensuring the center is thicker than the sides.
4. After the steel plate is properly adhered to the pre-planned position, gently tap the bonding surface with a hammer to check for hollow sounds. If there's no sound, it indicates a secure bond; if there is, it suggests the holes might be larger, and the bond isn't as good. In this case, remove the steel plate and reapply adhesive before bonding again.


Uneven ground settlement is also a common cause of cracks. During the leveling process of a house foundation, it usually undergoes the process of high excavation and low filling, resulting in varying degrees of ground settlement after the house is built. Once there is uneven ground settlement, the relative displacement between the areas with greater and lesser settlement can easily lead to diagonal cracks, which typically extend towards the depression. It is reported that such cracks usually appear at the lower part of the structure, developing from bottom to top in the shape of a "figure eight," inverted "figure eight," horizontal, and vertical cracks, primarily breaking through at the diagonals of the windows.

The company boasts a professional team. We consistently uphold reasonable pricing, integrity, promptness, and considerate service. Inken Reinforcement Materials is your reliable choice. In our continuous development, we always aim for technology, quality, and trustworthy service, meeting the ever-evolving market and customer needs, and contributing to the development and application of high-tech building reinforcement products!