The lines are stretched according to the construction drawings at the locations of the EPS components to be installed (centerline or edge line). All products produced by the cutting factory are fixed lengths, and it is recommended to use full lengths during on-site installation. Lines requiring cutting should be cut with a saw. The cutting surface should be as flat as possible. For uneven areas, the cost of EPS foam board per cubic meter is [price]. Sandpaper should be used for smoothing. Mortar is mixed on-site. ① The mortar used for construction is a special polymer adhesive mortar formulated for EPS substrates; ② During construction, a handheld electric mixer is used to mix the mortar, ensuring thorough and even mixing with moderate consistency; ③ After the mortar is mixed, it should be allowed to stand for 5 minutes before use, and it should be mixed again before application. The mixed mortar should be used up within 2 hours.
The fire safety performance of the thermal insulation system is based on the presence of combustible materials. Factors affecting the fire safety performance of the external thermal insulation system include the composition materials and construction methods of the system. Materials with sufficient combustion capacity within the system are primarily the insulation materials, EPS foam boards, and the combustion properties of the insulation materials are the basic condition affecting the system's fire safety performance. However, the overall fire resistance of the external thermal insulation system is the key.
When the thermal insulation layer of an external thermal insulation system is made of combustible material, the construction method of the system becomes a critical factor in determining the overall fire safety performance. Construction elements affecting the fire resistance of the external thermal insulation system include: the thickness of the protective layer or surface layer, the bonding or fixing method (with or without cavity), and the construction of fire partitions ( compartmentalization or fire separation strips).
(1) Our system products come with inspection reports issued by certified testing departments, accompanied by product qualification certificates. (2) The materials are in compliance with the national standard JGJI44-2004 (Technical Code for External Insulation of External Walls) Article 7.0.7. EPS foam board prices are applicable, and acceptance of quality is required before use in construction. (3) The system should be implemented after the quality acceptance of the base layer of the external wall, and the on-site construction conditions should meet the specified requirements. (4) The lines should be firmly bonded to the base layer, with no loosening or hollowing. The adhesive area of the extruded polystyrene board to the base wall surface should not be less than 40% of the EPS board area.
EPS Foam Board Price per Cubic - EPS Foam Board - Provided by Suzhou Weihao Insulation Materials Co., Ltd. Suzhou Weihao Insulation Materials Co., Ltd. offers services such as Extruded Polystyrene Insulation Board, Rock Wool Board, and Cement Foam Board. The company owns the "Weihao" brand and specializes in thermal insulation and heat insulation materials. It has a good reputation at No. 8 Jufeng Road, Beiqiao Street, Xiangcheng District, Suzhou. Please call for inquiries, contact: Manager Zhang.
