TELEC Certification Logo

TELEC (MIC) Certified Products:

1.2.4G Product

2. Bluetooth Products

3. WiFi Products

4. RFID Products

Materials Required for TELEC Certification:

Technical Type Specification Form

Declaration of Quality Management System

(3) Quality Certificate Approval Methods or ISO9001 Certificate (Letter of Quality Compliance)ntrol Confirmation MethodorManufacturer’s ISO 9001 Certificate）

(4) Structure Protection Approval Certificate (Letter of Compliance)nstruction Protection //confirm/i/iation）

(5) Rated Power Declaration

(6) Antenna Report

Test Reports (including Test Results, Test Setup Photos, and Examinations Conducted)

     (8)(Block Diagram, Schematic Diagram, Bill of Material, Parts Placement, IC Data Sheets, Internal and External Photos, Product Description, User manual,Operational/Technical Description, Description of Pheripherals/Accessories) 

(9) Tag Information (Tag Location, Tag Content)

    If you act as agentoras authorized representative of the manufacturer:

(10) Power of Attorney / Authorization Letter

Note:

All submitted documents are recommended to be in Japanese, although English documents are also acceptable. Test reports may be in the language used by local testing institutions.

2. TELEC is Japan's mandatory certification for wireless products, somewhat analogous to China's SRRC. It adheres to Japan's Radio Law. The specific testing specifications are in accordance with MIC (Ministry of Internal Affairs and Communications of Japan) Notice No. 88 regulations.

3. The testing items for WiFi and Bluetooth products are basically similar to the European standard EN300 328. For 2.4GHz WiFi products (802.11b/g, 2412~2472 MHz) and Bluetooth products, the standard used is MIC Notice No. 88 Annex 43. However, for the 14th channel of 2.4GHz WiFi products (Channel 14: 2471~2497 MHz), a separate Annex 44 is required for testing and reporting.

4. The testing standards for 5GHz WiFi products (802.11a, 5180~5320MHz, W52 Band and W53 Band) are in accordance with Annex 45; however, it's important to note that documents indicate the MIC will soon revise Annex 45 to include 5.6GHz devices (Band W56) and impose stricter DFS testing requirements for the Band 56 frequency band.

2.4G Product TELEC Certification Required Documents:

1. System block diagram

2. System Schematic

3. User Manual

4. Operation Instructionsnal description）

5. Bill of Materials

6. Module Schematic

7. Module Block Diagram

8. Module Specification Sheet

9. Manufacturer's ISO 9001 Certificate (ISO 9001 certificate of manufacturer)

Label and location diagram (label location label sample drawing photos)

Antenna Specification Sheet: Includes antenna name, type, large gain, measurement diagrams, appearance, and size drawings.

Note: All provided materials must be in English or Japanese.

TELEC Certification Process:

TELEC Certification for WLAN and Bluetooth Products

TELEC is Japan's mandatory certification for wireless products, somewhat akin to China's SRRC. It adheres to Japan's Radio Law. The specific test specifications follow the MIC (Ministry of Internal Affairs and Communications) Notice No. 88 regulations.

The testing projects for WiFi and Bluetooth products are basically similar to the European standard EN300 328.

Among our 2.4GHz WiFi products (802.11b/g, 2412~2472 MHz) and Bluetooth products, the standard used is MIC Notice No.88 Annex 43; however, for the 14 channels of the 2.4GHz WiFi products,

Bluetooth Product TELEC Certification Testing Project:

Frequency Error Measurement

2. Coupled Bandwidth/Spread-spectrum Bandwidth and Factor Testing

3. Unwanted Emission Intensity Measurement

4. Antenna Power Error Measurement

5. Limitation of Collateral Emission of Receiver Measurement Test

6. EIRP Antenna Power Measurement (Transmission Antenna Gain Testing)

7. 3dB Beamwidth Transmission Radiation Angle Width Measurement

8. Duty Cycle Testing

9. Retention Time Test

TELEC Certification Cycle

The TELEC certification process takes 3-4 weeks.