详情描述

Operating Principle
Fuel is burned in the burner to produce high-temperature flue gas. This flue gas is then used to heat the air in a hot air furnace equipped with enhanced heat exchange measures. After releasing heat, the high-temperature flue gas is discharged into the atmosphere at a reduced temperature of 250°C. The air to be heated is forced into the hot air furnace through an optional blower, and after absorbing heat, it is delivered from the hot air outlet at the specified temperature. When the hot air temperature reaches the upper limit, the burner automatically stops burning or switches to a low flame. When the hot air temperature falls below the lower limit, the burner reignites and operates again or switches to a high flame. The rate of temperature increase can be adjusted by opening the air inlet valve.

1.jpg

2.jpg

Specs & Parameters

 

 

 

ModelBurner ModelFuel Consumption: kg/h104 kcal/h supply heatDimensions: L×W×H mmHot Air Nozzle L×W mmTotal Weight: kg
RLY1RIELLO.G3/DL3FS1.3-1.611200×1200×1600Φ200460
RLY4RIELLO.G10/DL10FS5-6.541700×1300×1600Φ250850
RLY10RIELLO.G20/DL23FS13-16102300×1568×1870Φ3002200
RLY20RIELLO 1G/DL34FS26-32202800×1568×1870Φ4002670
RLY30RL50/DL55FT39-48303400×1568×1870Φ4503060
RLY40RL70/DL75FT52-64404440×1768×2070Φ5505600
RLY60RL100/DL100FT78-96605140×1868×2070Φ6008460
RLY100PRESS 4G/DL 120FT130-1401006440×2480×2300550×60012800
RLY160P300/DL250FT200-2701607470×2920×3480750×90015780
RLY200P300/DL300FT260-3002008175×2920×3480750×90018500
RLY360G1510480-6203609300×2920×3480
21000

Image Gallery