YPG Series Pressure Atomizing (Cooling) Dryer

Product Description
This unit is a device capable of simultaneously performing drying and granulating. The pressure, flow rate, and size of the nozzle of the feed liquid pump can be adjusted according to process requirements.Obtain spherical granules in the required size proportion.
Working Principle
The unit operates by feeding the material and liquid through a diaphragm pump at high pressure, which then sprays them out as mist droplets. These droplets are carried down with hot air in a concurrent flow. Most of the powder particles are collected at the discharge outlet at the bottom of the tower. The exhaust gas and fine particles are separated by a cyclone separator, with the exhaust gas discharged by a fan. The powder is collected by a dosing hopper located below the cyclone separator. A secondary dust removal device can also be equipped at the fan outlet, achieving a recovery rate of over 96-98%.
Performance Features
◎Fast drying speed, the surface area of the liquid material is greatly increased after atomization, which can evaporate 95% to 98% of the moisture in the hot air stream instantly, and the drying process takes only a few seconds to several tens of seconds, especially suitable for drying heat-sensitive materials.
All products are spherical granules with uniform particle size, good fluidity, excellent solubility, high purity, and good quality.
Wide range of applications; adaptable to material properties, capable of using hot air drying or cold air granulation.
Operation is simple and stable, with convenient control and easy to automate tasks.
Material-compatible
Spray Dried Particle
Chemical Products: Catalysts, resins, synthetic detergents, oils, ammonium sulfate, dyes, dye intermediates, carbon black, graphite, phosphoric acid amides, etc.
◎Food: Amino acids and analogs, seasonings, proteins, starches, dairy products, coffee extracts, fish meal, meat extracts, etc.
Traditional Chinese Medicine, pesticides, antibiotics, pharmaceutical syrups, etc.
◎Ceramics: Magnesium oxide, porcelain clay, various metal oxides, dolomite, etc.
Spray Granulation: Various fertilizers, alumina, ceramic powder, pharmaceuticals, super-hard steel, chemical fertilizers, granular laundry detergent, traditional Chinese medicine.
Spray cooling granulation: Amino acids, paraffin, glycerol esters, beef tallow, etc. Commonly used in spray crystallization, spray concentration, and spray reaction processes.

Specification parameters

★The above evaporation amount is the maximum evaporation.

Photo Gallery