Baosteel's Color Steel Plates Offer Various Thicknesses: The thickness of color steel plates typically ranges from 03mm to 16mm, while the thickness of the sandwich panels can vary between 50 to 200mm. The thickness of the color steel plate affects its application; for heavy-duty use, a higher thickness is required, with the base plate thickness needing to be at least 2mm or more. When considering flat steel, medium-thick plates, and coil slitting, there are numerous specifications available, with thicknesses ranging from 3-200mm in every integer; widths from 450-4800mm, and lengths below 25000mm are more conventional, allowing for thicknesses such as 50mm, 60mm, 80mm, 100mm, up to 240mm. The approximate range provided is between 50mm and 250mm, while length requirements are not stringent and can be customized as needed. Width options include standard 1150mm or 1200mm. This concludes the introduction to the various thicknesses of Baosteel's color steel plates. If you have any further questions, feel free to consult our website, where our professionals will be happy to explain. Editor's Recommendations: [Baosteel Color Coated Sheet] Classification of Coated Sheets, [Baosteel Color Steel Coil] Types of Color Steel Coils, [Baosteel Color Steel Plate] Various Thicknesses of Baosteel Color Steel Plate, [Baosteel Color Coated Coil] Types of Coatings on Color Coated Coils, [Baosteel Color Coated Sheet] Development of the Coated Sheet Industry, [Baosteel Color Coated Coil] Classification of Base Coils, [Baosteel Color Steel Plate] Introduction to Color Steel Plate, [Baosteel Color Coated Coil] Uses of Color Coated Coils.