LT-FM012A螨虫-resistant finishing agent specifically formulated for the home textile industry. Suitable for cotton, linen, silk, wool, and cotton-polyester blends.Nylon, viscose, acrylic, and other fabrics.All home textiles, including weft and warp woven fabrics, suitable for applications other than polypropylene.Please provide the Chinese content you would like translated into American English.All standard fibers and fabrics. This product can be used to treat bedding items such as mattresses, comforters, pillows, sheets, pillowcases, curtains, wallpaper, blankets, as well as decorative indoor textiles and fabrics for furniture.
Physical and Chemical Properties:
Appearance: Light yellow transparent liquid
Ionic: Non-ionic
Solubility: Soluble in esters and polyhydric alcohols. Dissolves in water.
PH:6.5-7.5
Density:1.02-1.05G/CM3
High-temperature Stability: Roasting: Not exceeding150Degree
Function:
Treat with anti-mite conditionerLT-FM012Treated fabrics exhibit a very high repellency against dust mites, scabies mites, sand fleas, and demodex mites, and also possess excellent wash resistance.
Product Features:
1Repels dust mites and prevents their proliferation in fabrics.
2Does not affect the fabric color.
3Does not affect wash fastness.
4Compatible with other fabric finishes;
5Comply withOeko-texStandard100Please provide the Chinese content you would like translated into American English.Ⅱ-ⅣCategory standards。
Application Method:
LT-FM012Suited for various processing methods, including pad dyeing, exhaustion dyeing, spray dyeing, coating, and foam application.
To achieve the protective effect of mite repellency, the dosage of anti-mite finish on the fabric should be:1.5-2.5%(Dry weight of the fabric)At this point, you can obtain durable10Over and above40Dewatered wash.
Pad-dyeing: UndilutedLT-FM012Add while stirring to the treatment solution and adjust to the desired level.PHValue, and can also add necessary wetting agents to enhance the rolling yield.
Coating Application: Anti-mite finish agent can be mixed with water-soluble or oil-soluble adhesive backing. Please check its compatibility beforehand.
Spray method: This product can only be sprayed in a diluted form. Use water to...1:50Use after dilution to the specified ratio. When using the spray method, it is essential to take necessary labor protection measures.
Foam Method: Add the desired amount of bubble activator to the foam bath. To ensure adequate penetration in medium to thick fabrics, the foam must be applied to the wet material.
Performance Testing Methods:
The current testing methods for mite repellency rate utilize the approach from the Osaka Institute of Public Health, Japan, and the "Testing Methods and Evaluation of Hygienic Pharmacodynamic Tests" by the Chinese Ministry of Agriculture.
