Massaging Chair

Blow molding film processing wholesale process is generally as follows:

Hopper feeding one material → plasticizing extrusion → blowing and stretching → air ring cooling → V-blade → traction roller traction → corona treatment → film winding

However, it is worth noting that the performance of blow molding processed wholesale film is greatly related to the production process parameters. Therefore, during the blowing process, it is essential to strengthen the control of process parameters, standardize process operations, ensure the smooth progress of production, and obtain high-quality film products. In the production of polyethylene blow molding processed wholesale film, the main focus is on controlling the following process parameters:

Extruder temperature

During the blow molding process for low-density polyethylene (LDPE) film, the extrusion temperature is typically maintained between 160℃ and 170℃, and it is essential to ensure uniform die head temperature. Excessive extrusion temperature can cause resin decomposition, making the film brittle, particularly reducing the longitudinal tensile strength significantly; whereas, too low a temperature leads to poor resin plasticization, preventing smooth expansion and stretching, resulting in lower film tensile strength, reduced surface luster and transparency, and even the appearance of wood grain patterns and unmelted crystal nuclei (fish eyes).

2. Blowing Ratio

Blow-up ratio is one of the key control points in the production process of blown film for blow molding wholesale, referring to the ratio of the diameter of the film bubble after inflation to the diameter of the un-inflated tube ring. The blow-up ratio represents the lateral expansion multiple of the film and, in essence, is a form of lateral stretching that exerts a certain degree of orientation on the plastic molecules. As the blow-up ratio increases, it enhances the lateral strength of the film. However, the blow-up ratio should not be too high, as it can lead to instability in the film bubble and the film may wrinkle easily. Therefore, the blow-up ratio should be properly coordinated with the draw ratio. Generally speaking, the blow-up ratio for low-density polyethylene (LDPE) film should be controlled between 2.5 and 3.0.

Blow molding wholesale products produce pollutants.

During the blow molding processing and wholesale processing, plastic pellets generate a small amount of organic waste gas due to high temperatures, with the main component being non-total hydrocarbons.