UB1000-18GM75-I-V15

Inductive Distance: 70...1000 mm
Adjustment Range: 90...1000 mm
Blind Zone 0...70 mm
Standard Target Board 100mm x 100mm
Transducer Frequency approx. 255 kHz
Response Delay approx. 125 ms

LED Indicator/Light Operation Button
Yellow LED steady-on: Target within detection range
Yellow light flashing: Target object detected under TEACH-IN function
Red LED steady on: Error
Red light flashing: Target object not detected under TEACH-IN function
Electrical Characteristics
Working voltage: 10...30 V DC, ripple 10% SS
No-load current ≤ 45 mA
Input/Entry
1 synchronous connection, bidirectional
0-level: -UB...+1 V
1-level: +4 V...+UB 
Input Impedance: > 12 kΩ
Synchronous pulse: ≥ 100 μs, Synchronous pulse interval: ≥ 2 ms
Synchronous Frequency
Normal operating mode max. 40 Hz
Multiple modes ≤ 40 Hz/n, n = number of sensors
Input
Input Type 1 TEACH-IN Input
Lower detection range limit A1: -UB ... +1 V, Upper detection range limit A2: +4 V ... +UB
Input Impedance: > 4.7 kΩ, Pulse Width: ≥ 1 s
Output
Type of Output 1 Analog Output 4...20mA
Resolution: 0.35 mm
Characteristics curve deviation ±1% of full-scale value
± 0.1% repeatability of full-scale value
Load Impedance 0...300 Ohms
Temperature Drift ± 1.5% of Full-Scale Value


Analog Output 4~20mA
Adjustable measurement window
Available in various horn widths
Functional Input
Synchronization feature
Sensor shutdown feature
Temperature Compensation
Minimal blind spot