Aluminum Cap Factory

Process for Aluminum Cap Forging

1. Operators should be familiar with the product drawings, technical requirements, quality standards, and quantities before stamping. They must also confirm the material and specifications of the aluminum end caps before beginning production.

2. Select the matching mold based on the diameter of the aluminum cap and the plate thickness.

3. Sheets should be covered with a plastic film before stamping, and lubricant should be applied to the mold to prevent scratches during the stamping process.

4. During the pressing process, the actual conditions on-site should be repeatedly pressed multiple times. The number of pressing should be within the range of 6-7 times to ensure there are no dents, elongations, or frills.

5. After the first aluminum cap blanking forming, the geometrical dimensions and shape are inspected and approved before mass production can commence. Random inspections are conducted throughout the production process to strictly prevent the occurrence of non-compliant products.

6. After aluminum head forming, the edges are trimmed, followed by polishing and surface finishing.