Steel wire mesh composite pipe overcomes some shortcomings of steel pipes and plastic pipes, ensuring the respective advantages of each. AdoptedPriorOur production process andHigh qualityMaterials with excellent pressure resistance and wide applications. The following pipeline cross network will guide you through its maintenance methods:
Firstly, the repair methods for leaks at pipe and fitting welding and hot-melt joint interfaces.
In this case, the pipeline should be cut and the pipe and fittings should be re-melted and thermally fused according to the construction requirements.
Next, the pipeline repair method using electrical and thermal fusion connections results in a minimal damage range.
In this case, the damaged pipeline should be cut using the brazing sleeve or the improved saddle brazing joint repair method, and then connected with the brazing sleeve or the improved saddle brazing joint.
Third, the repair method for pipelines with large damage scopes due to electrical and thermal fusion connections.
In this case, it is necessary to remove the damaged pipe section and replace it with a new one. Melt-welding, hot-melt, or flange joints can be used at the connection point.End of contentA weld must be connected using a sleeve or flange joint.
Four: Repair Methods for Damaged Flexible Connection Pipes with Socket and Spigot Rubber Rings
In this case, the damaged pipe section can be removed, replaced with a new one, and then connected using double clamps or a flexible sleeve.
News Center Co., Ltd.
