Customers frequently purchase products from other manufacturers.No Chinese content provided.Soil Spraying MachinePlease provide the Chinese content to be translated.After a whileAn issue has arisen.The followingFor Sen里克SummaryCommon Faults Encountered by CustomersNo Chinese content provided.!
Engine
Please refer to the diesel engine user manual for frequent malfunctions.
Clutch
Clutch issues are common, often due to slipping and excessive wear on the friction plates, requiring replacement of the friction plates or the clutch assembly. Another solution for a low battery voltage issue: Check if the generator voltage is normal and if the wiring connections are tight.
Three: Spray Pump
The slurry of the soil-spraying machine is not high. Reason: The pump clearance is too large, the slurry is too thick, check the pump impeller of the sprayer.Solutions for (depending on the degree of wear): Adjusting the mud pump screw, replacing the mud pump, adjusting the mud concentration ratio, and replacing the mud pump impeller.
The slurry pump of the soil spraying machine has leaked. Cause: The pump cover was loose, and the oil seal was worn out.Seals, the pump intake is very little air or oil from the oil tank. Solution: Adjust or replace the pump cover, adjust the mud pump cover, and replace the oil seal (ring).
Four: Hydraulic Section
The spindle is not working and not stirring. Cause: Air intake pump or a small amount of oil in the oil tank, clogged oil filter, or blocked ball valve. Solution: Check the pump's entry into the oil line or add to the oil tank, clean or replace the oil filter, clean the hydraulic oil tank filter, and clean the solenoid valve.
Hydraulic oil temperature is too high. Causes: Insufficient hydraulic gear pump or anti-wear hydraulic oil, Mahai, cooling fan not functioning. Solutions: Replace the gear pump or hydraulic motor, refill oil to the correct level, or check the cooler air.
Five: Spray Gun Parts
Cannot spray pulp. Reason: Clogged intake nozzle, slurry pump. Solution: Check the joint.Check the pump exhaust valve.
Joint leakage. Cause: Worn oil seal, worn gasket. Solution: Replace oil seal, replace sealing gasket.
Sunforce hereby commits to:No matter which manufacturer's spray seeder you purchase, Senliker can promptly provide you with parts and repair and modification solutions, and supports customized services as needed. When you encounter leakage at both ends of the cabinet, Senliker can use our exclusive double-end face machine sealing with lubricant, to carry out the repair and modification for you, ensuring no leakage for over five years, helping you save time and improve construction efficiency.
