Grab bars, a blessing for many disabled and elderly friends, are used in numerous locations.

Today, we share information on the installation of accessible handrails and important installation precautions, hoping it provides reference for your installation work.

The height of the single-handrail for accessibility should be 850mm to 900mm, while the upper handrail of the double-handrail for accessibility should be 850mm to 900mm, with the lower handrail height ranging from 650mm to 700mm.

2. Handrails should be continuous; the starting and ending points of handrails along the wall should extend horizontally for at least 300mm.

3. The end of the wheelchair ramp should turn inward towards the wall or extend downward for at least 100mm.

4. The distance between the inside of the barrier-free handrail and the wall is not less than 40mm.

5. Round, easy-to-grasp handrails with a diameter of 35mm.

Installation precautions and specifications for accessible handrails mainly fall into the following two scenarios.

One. Standard for Installation of Handrails in Corridors and Walkways

Handrails should be installed on both sides of ramps, steps, and staircases, with a height of 0.85m; when two handrails are provided, the lower handrail should be 0.65m high.

2. The distance between the inside of the handrail and the wall should be 40-50mm.

3. Handles should be installed securely and shaped for easy gripping.

Section 2: Installation Standards for Barrier-Free Grab Bars in Bathrooms and Public Toilets, Bathroom Grab Bars, and Safety Handrails

Safety grab bars should be installed 50mm from the sides and front edge of the washbasin.

2. Safety grab bars measuring 0.60-0.70m in width and 1.20m in height should be installed on both sides and above the toilet.

3. The toilet height is 0.45m, with 0.70m horizontal grab bars on both sides, and a 1.40m vertical grab bar on one side of the wall.

4. The diameter of the accessible handrail should be 30-40mm.

5. The inside of the handrail should be 40mm away from the wall.

6. The handle should be securely mounted.