Chengyi Protection 140 Collision Guard Rail, Aluminum Alloy Wall-Mounted Collision Guard Rail_SupplyPro Co., Ltd._Shandong Chengyi Plastic Products Co., Ltd. 
在线客服 在线客服邀请中...
关闭

您好,现在客服正邀请与您通话,请留下您的联系方式,客服将尽快与您取得联系。

 点击提交代表您同意《服务条款》《隐私政策》
Shandong Chengyi Plastic Products Co., Ltd.

Anti-collision handrails, Accessible handrails, Architect...

Consultation Hotline
13173008182

Product Categories
Home > SupplyPro Co., Ltd. > Chengyi Protection 140 Collision Guard Rail, Aluminum Alloy Wall-Mounted Collision Guard Rail
Chengyi Protection 140 Collision Guard Rail, Aluminum Alloy Wall-Mounted Collision Guard Rail
品牌: Chengyi Protection
Brand:
Specs: 4-meter span
Aluminum thickness: 1.4, 1.5
单价: 49.00/Piece
最小起订Quantity: 100 Piece
供货总Quantity: 10000 Piece
有效期至: 长期有效
最后更新: 2023-06-08 15:21
 
详细Info

What are the seven steps to install a hallway handrail?As interest in corridor railing issues grows, many are turning to knowledge on the subject, with some asking how to install corridor railings? Let's take a look at the introduction by the editor.First, securely install one vertical post at the top and bottom before attaching the handrail. Then, pull a straight line between the two posts above. Place the middle post on the steps (note: you can move the post forward and backward on the steps to position it at the same height as the line), mark the drilling locations on the post with a marker, and then drill and secure the post.2. For installing handrails on corridors with pre-laid tiles or marble floors, use a glass drill bit to drill holes first. Before drilling, form a circle around the area to be drilled with rubber cement to collect water for better drilling. After using the glass drill bit, drill with a 12mm diameter hammer drill bit. If the base is wooden, you can directly fix the column with self-tapping screws.3. For installing handrails in corridors, you can use thin galvanized water pipes. Simply slip the pipe over the wire, and bend it by hand where needed. This method is more labor-saving. For wires with a diameter over 12mm, use a wire bending tool. First, measure the bend position of the wire, then bend it and insert the wire through the hole. After placing the wire in position, secure the wire hole to the column.4. Fixed Handrail Installation for Corridor Handrails: First, measure the area where bending is needed, then wrap the handrail section to be bent with a heat blanket and heat it for 15-20 minutes. Once the handrail softens, it can be bent. (If the heat blanket is long, you can loosen it at the area where bending is not required.) Remove the heat blanket, hold the handrail against a post, and then apply a cold compress with a warm towel to shape the handrail along the bend. Wipe repeatedly until the handrail sets. If the handrail has scratches during transportation or daily use that affect its appearance, you can also use the heat blanket to heat and wipe to eliminate the scratches.


询价单
主题 *
内容 *
Your company's名
Contact person *
ContactPhone *
电子Email
验证码  
 点击确定代表您同意《服务条款》《隐私政策》
 
 Click submit means you agree to《Service terms》《Privacy policy》

13173008182