BOT-LED-3000P Type White Light Parallel Light Source is a series of light inspection machine light sources developed and launched by our company, equipped with collimating and expanding lenses for light output. It boasts high beam quality, high electrical-optical efficiency, high stability, compact size, maintenance-free operation, and ease of use, suitable for equipment, detection equipment, photoelectric material research institutions, and universities. Key Technical Features: · Output power adjustable from 0 to 3000 mW (continuous) · Continuous output mode · Electric, optical, and control highly integrated, plug-and-play operation · High stability, power output fluctuation <5% under full load · Collimated light output, focus point adjustable · Easy to operate, maintenance-free Main Technical Parameters: Model: BOT-LED-3000P Unit: Central Wavelength: White Light nm Spectral Width: nm Output Power: 0—3000 mW Operating Mode: CW Beam Diameter: 25 mm Working Voltage: 220 VAC Total Power Consumption: 0-5 W Cooling Method: Natural Cooling Power Stability: <5% Size: Φ30×125mm Weight: 1.5 kg Instructions: 1. The light source drive power has two channels, capable of powering two light sources simultaneously. When using a single channel, it can be used arbitrarily. 2. The light source brightness is adjustable; the adjustment knob is located on the front panel and corresponds to the position of the connected light source. Clockwise increases brightness, counterclockwise decreases it. Adjust as needed for general use. 3. The operating distance of the light source is 12-15cm, with a light spot of 25mm. If the on-site conditions do not meet the requirements, adjust the first two lenses, and then secure them with screws.