BP-8178-B
Laboratory Blown Film Machine/PLC Control
Extrusion blowing film involves the process of continuously extruding plastic melt through a die under specific temperatures and shear forces, inflated by compressed air, cooled by an air ring, and pulled at variable speeds to obtain a double-layered plastic film.
Single-screw extruder
Screw Diameter: 20
Length-to-diameter ratio: 1:28
Screw Speed: 0-150 rpm Variable Frequency Control
Bolt Material: 38CrMoAlA chrome-molybdenum alloy, surface treated with quenching, nitriding, chrome plating, polishing, and fine grinding, with a roughness Ra≤0.4μm, nitriding layer depth≥0.6mm, hardness HRC55~60
Barrel Material: 38CrMoAlA chrome-molybdenum alloy, surface treated with quenching, nitriding, chrome plating, polishing, and fine grinding, with a roughness Ra≤0.4μm, nitriding layer depth≥0.6mm, hardness HRC55~60
Quick Change Chuck: C-type ring clamp connection, easy for rapid connection with downstream equipment
Drive Motor: 2.2KW Precision Gear Reducer Motor
Volume: 1450×500×940 mm (W×D×H) (excluding adjustable electrical control box)
Weight: Approximately 175 kg
Blow Molding Tower
Mold Diameter: 30
Blow-up Gas: 0~6bar adjustable compressed air
Cooling Gas: Blower Flow Rate 30L/min
Axle Roller: 80×L320mm
Roller: 80×L320mm
Traction unwinding speed: adjustable from 0.5 to 5 m/min
Traction Motor: 90W
Coiling Motor: 3.5 Nm
Fan: 0.25KW
Observation Box: LED Light Source
Volume: 800×700×2050 (W×D×H) mm
Weight: Approximately 215 kg
