This equipment is primarily used for high-precision, high-speed multi-wafer cutting of ultra-hard and brittle materials such as sapphire, artificial gems, and ceramics.
Model | CA-400MultipleThreadCutting Machine | ||
Unified mobility approach | Single-line supply for round-trip movement | ||
Cuttable workpiece dimensions (length)*Wide ＊High (no Chinese content) | 100x 250 x 100mm | ||
Lora | Please provide the Chinese content you would like to be translated into American English.Diameterx Conduit Width | ¢ 150x 250mm | |
Main shaftsPlease provide the Chinese content to be translated. | 395mm | ||
Thread | Utilize wire diameter | ¢ 0.10～0.25 (mm) | |
Recirculation Factor | Round trip9/minute | ||
Cutting Speed | Suggest | 720-800 m/min | |
| 1000 m/min | ||
Spool of coated wire | 0.25mmGolden Knot20km | ||
Offered Quantities | 1Roll | ||
Reciprocating motion mechanism | Spindle servo motor rotating in both directions | ||
New shipment to the institution | Supply WireServiceMotor reversible rotation | ||
Fixed Tension Attachment | Servo motor returns to giant control mode | ||
Workpiece Table | Travel stroke | 120 mm | |
Cutting Feed Rate | 0.1 ~999.9 mm/hour | ||
Quick delivery to speed | 150mm/min | ||
Processing Swing Angle | ±7deg | ||
Processing Swing Speed | 20-400deg/min | ||
Please provide the Chinese content that needs to be translated into American English.He | Use power | Three-phase 380V 50HZ | |
Full Load Power | Approx.30 KVA | ||
Utilize air-source | 0.6 mPa -6001 Liter/minute | ||
Machine dimensions (length) x High* Wide | 3000 x 1490x 2630 (mm) | ||
Machine Weight | Approx. 4000 Kg | ||
Product Features
Workstation升降摇摆system
Utilizing imported components such as high-strength rolling guides from Japan's TH K and ball screws from Taiwan's HIWIN, combined with one-piece castings, the equipment ensures rigidity and stability in operation, achieving ideal precision in cutting products. Additionally, high-precision servo motors drive the worktable to oscillate smoothly and accurately, matched with different cutting plans for various products, achieving high-speed, high-precision cutting of ultra-hard materials.
Main Configuration
·All equipment bearings are of Japanese NSK Crystal brand, the Z-axis lifting worktable uses Japanese THK reinforced-type special sliders, ensuring stable operation under high-speed and heavy-load conditions, and avoiding the risk of poor parallelism of workpieces due to insufficient strength and gaps.
All motors are selected from Hitachi, Japan, ensuring the stability of equipment operation and the reliability of control.
· Equipped with special refrigeration units produced by Tongfei Company, offering stable and reliable performance (this manufacturer exclusively supplies to companies like Shenyang Machine Tool).
