First and foremost, select a location free of dust and avoid leaving many pathways around the area where the online cutting will take place.
The inherent characteristics of the medium-speed wire cutting open electrical machine include the presence of a certain amount of dust in the air, which may cause the machine's screw to suffer severe wear with a certain probability, thereby affecting the lifespan of the machine.
(2) The linear cutting open electrical machine is under computer control. The disk used by the computer has strict requirements for air dust. When dust enters the disk, it can damage the disk itself as well as the hard drive.
(3) The open motor generates a significant amount of heat, thus necessitating frequent air circulation within the electrical cabinet. If there is too much dust in the air, it can accumulate on various electrical components during the ventilation process, leading to poor heat dissipation for the components and eventually causing the circuit board to burn out. Therefore, the dust-proof net on the machine should be cleaned regularly.
Select a location that can accommodate the machine tool's weight.
3. Select a location free from vibrations and impacts. The precision cutting machine tool using medium wire cutting is a high-precision processing equipment. If vibrations and impacts are present at the placement site, it will pose severe harm to the machine, severely affecting its processing accuracy, shortening its service life, and even leading to machine scrapping.
4. Meets the spatial standards required for servo wire cutting.
Choose locations with minimal temperature fluctuations, avoiding direct sunlight through windows and skylights and proximity to heat sources.
The product demand for high-precision parts processing is conducted at a stable temperature, typically room temperature, around 20°C.
(2) Due to the significant heat generated when the CNC wire-cutting machine cuts itself during operation, excessive temperature changes can severely impact the machine's lifespan.
6. Selecting Shielded Enclosures: Since the wire cutting open electrical machining process belongs to the arc discharge process, it generates intense electromagnetic waves during the arc discharge process, which can harm human health and also affect the surrounding environment.
7. Selecting workshops with excellent ventilation and spacious layouts ensures operators and machine tools can work in a favorable environment.
