I. Product Introduction:

OrdENThe surge protection module is designed, manufactured, and tested in accordance with international standards IEC61643, national standards GB18802.1, and meteorological industry standards QX10.1-2002 and communication industry standards YD/T1235.1-2002. The product undergoes strict quality control in compliance with the ISO9001 quality assurance system.

This product is widely used in power systems for mobile communication base stations, microwave communication offices/stations, telecommunication rooms, industrial factories and mines, civil aviation, etc., such as various power distribution stations, power rooms, distribution panels, AC/DC power distribution screens, switch boxes, and other important equipment prone to lightning strikes.

◆ Utilizes a pressure-sensitive resistor chip for stable and reliable performance.

◆ Features a plug-and-play structure for easy replacement;

Mechanical thermal release device with high sensitivity.

Modular sealing design, high flow rate, and lower protection level.

Single phase, can be combined to form multi-phase for various grid configurations.

◆ Features a degradation display window and can be equipped with a remote遥信output interface.

The housing is made of high flame-retardant material, offering high safety performance.

◆ 35mm track mount, standard modular design

Product is available with FM alarm function option.

A wide variety of product colors and styles are available to meet diverse aesthetic requirements!

◆ Product parameters are for single module only. For three-phase, please change the model to /4. For single-phase, please change the model to /2.

ThreeTechnical Specifications:

Section 4: Product Installation Instructions:

Prior to installation, the power must be disconnected, and operation with live power is strictly prohibited.

2. Recommend串联 a fuse or a circuit breaker at the front of the lightning protection module.

3. SPD parallel installation at the power input end of the building's distribution box or the server room, the product is for rail-mounted installation, and Kevin connection can be adopted if conditions permit.

4. Please connect according to the installation diagram provided: L is the phase line, N is the neutral line, and PE is the ground line. Do not connect them incorrectly. After installation, turn on the automatic circuit breaker switch and check if the operation is normal.

5. During operation, the lightning protection module should be regularly inspected and the status of the fault display window checked. When the fault display window shows red or the remote signal terminal outputs an alarm signal, it indicates a fault in the lightning protection module, and it should be repaired or replaced promptly.

6. Suitable for indoor operation; if installed outdoors, a waterproof housing must be added.

All wiring must be securely and reliably connected.

8. Lightning protection grounding should comply with lightning protection specifications, with grounding wires being as thick and short as possible, and the grounding resistance should be less than 10Ω.

I. Product Introduction:

OrdENThe surge protection module is designed, manufactured, and tested in accordance with international standards IEC61643, national standards GB18802.1, as well as meteorological industry standard QX10.1-2002 and communication industry standard YD/T1235.1-2002. The product undergoes strict quality control in compliance with the ISO9001 quality assurance system.

This product is widely used in power systems for mobile communication base stations, microwave communication stations/offices, telecommunication rooms, industrial factories and mines, civil aviation, etc., including various power distribution stations, power rooms, distribution cabinets, AC/DC distribution panels, switch boxes, and other critical equipment prone to lightning strikes.

◆ Utilizes a pressure-sensitive resistor chip for stable and reliable performance.

◆ Features a plug-and-play structure for easy replacement;

◆ Equipped with a mechanical thermal release device, featuring high sensitivity in operation.

◆ Modular sealing design, high flow rate, lower protection level;

◆ Single-phase, capable of being combined to form multi-polar for use in various grid configurations.

◆ Equipped with a degradation display window, and can be equipped with a remote遥信output interface.

The housing is made of high flame-retardant material, offering high safety performance.

35mm track mounting, standard modular design.

Product is available with FM alarm function option.

◆ A wide variety of colors and styles available to meet diverse aesthetic requirements!

◆ Product parameters are for single-module units. For three-phase, please change the model to /4. For single-phase, please change the model to /2.

ThreeTechnical Specifications:

Section 4: Product Installation Instructions

Before installation, power must be disconnected, and operation with power on is strictly prohibited.

2. Recommend connecting a fuse or an air switch in series at the front end of the lightning protection module.

3. SPD is paralleled installed at the power input end of the building's distribution box or the power room. The product is for track-mounted installation, and the Kelvin connection method can be adopted if conditions permit.

4. Please connect according to the installation diagram provided, with L representing the phase wire, N the neutral wire, and PE the ground wire; do not connect incorrectly. After installation, close the automatic circuit breaker switch and check if the operating status is normal.

5. During use, the lightning protection module should be regularly inspected and the status of the fault display window checked. If the fault display window shows red or if the remote signal terminal outputs an alarm signal, it indicates a fault in the lightning protection module, and it should be repaired or replaced promptly.

6. Suitable for indoor operation; if installed outdoors, a waterproof housing must be added.

All connections must be secure and reliable electrical connections.

8. Lightning protection grounding should comply with lightning protection regulations, with grounding wires as thick and short as possible, and the grounding resistance should be less than 10Ω.