In the aeration process of aerated concrete equipment, the molding process of the aerated blocks is crucial. We must pay attention to the external temperature. Below, the aerated brick manufacturer will mainly explain the production conditions for the aerated concrete block equipment:
Autoclaved Aerated Concrete Equipment
1The aerated concrete equipment block molding machine requires a level working area; wooden pallets300-500Blocks must be uniform in size, and the wooden slabs need to maintain a flat and consistent surface as well as uniform height.
2The aerated concrete block forming machine has the following requirements for raw materials: crushed stone, with particle sizes not exceeding...10Millimeters, the particles should not be more than needle-like or flake-like.15Please ensure that the percentage contains no excess weight of impurities such as debris, soil, or stone dust.2％。
3Curing of Autoclaved Aerated Concrete Blocks: When (the outdoor temperature is)20°C-30°CAt this moment, natural preservation in shaping3-4Hours later, the covering, watering, and maintenance can commence.24The product can be transferred for heap maintenance within hours. It can be transferred for heap maintenance after two days when the temperature is too low, and the maintenance duration is...7Days. Water every two hours on sunny days.1-2No Chinese content provided.;Keep the blocks moist; during winter, in addition to watering and maintenance, cover them to insulate against freezing. Handle them gently when moving or stacking to avoid damage. To ensure the production of high-quality aerated concrete blocks, please take note of these instructions with care.
The use of the aerated concrete block making equipment includes: The equipment is used for the fixed production of various specifications of standard bricks, hollow blocks, and porous bricks, etc.
When introducing autoclaved aerated concrete, adjustments to its density and grade are not as flexible and convenient as with ordinary reinforced concrete. Similarly, when designing and constructing new factories for autoclaved aerated concrete equipment,Please provide the Chinese content to be translated.When developing product solutions, it is crucial to consider the specific needs of products in architectural applications, not merely focusing on the potential and economic rationality of a product in production technology. We must avoid developing a single product at the expense of overlooking the production of complementary products for architectural use. For aerated concrete used solely as non-load-bearing protective structures, its density and grade can be lower. However, for aerated concrete products used as load-bearing components, their density and grade should be designed to be higher. Otherwise, if we blindly apply experience from overseas or other regions, it could lead to products that do not meet the actual needs of our region.
