The Cement Pipe Making Machine, as the name suggests, is a mechanical device for producing cement pipes. It is also commonly referred to as the Cement Pipe Making Machinery and Equipment, and in some southern regions of China, it is called the Culvert Pipe Machinery. The cement pipes produced by the Cement Pipe Making Machine are used in deep well, municipal drainage, expressway and other water supply and drainage projects, making significant contributions to China's urban construction. During the operation of the Cement Pipe Making Machine, especially in summer, encountering issues with excessively high oil temperatures may occur. Today, I'll discuss how to avoid excessive oil temperature in the Cement Pipe Making Machine.
Firstly, it's important to understand that if the oil temperature of a cement pipe making machine gets too high over time, it can eventually burn out the motor. Therefore, knowing how to prevent excessive oil temperature is crucial. Below, we'll discuss a few commonly used methods:
Regularly monitor and maintain the appropriate oil level in the fuel tank to ensure sufficient circulation and cooling conditions for the oil in the system.
2. Properly select the viscosity of the oil used in the system. A high viscosity leads to energy loss during the oil's flow; a low viscosity adds leakage, both of which increase oil temperature. When the oil degrades, it also reduces the volumetric power of the cement brick making machine, damaging the oil film between the surfaces in relative motion, increasing resistance and friction loss. All these contribute to the oil heating up, so it is also necessary to maintain the cleanliness of the oil and replace it promptly.
When the cement brick making machine system is not in operation, the cement brick making machine must be unloaded.
Ensure the water level in the cooler is sufficient and the pipelines are clear at all times.
