Many products in our daily lives encounter minor issues that can be quite frustrating, such as many sealing products. Often, the seals and silicone accessories used in everyday life experience aging and failure, impacting their lifespan. Common issues include接头密封 and pipeline sealing rings. A single faulty sealing component can affect the overall performance of the entire product. Therefore, it is quite important to select silicone sealing rings properly; otherwise, it can severely affect the entire product.
Silicone sealing products are ubiquitous in everyday life, such as on water pipes, drinking water machines, and door and window valves, etc. Therefore, their adhesion and tightness are crucial. When it comes to quality issues, aging and lifespan are the main factors affecting them significantly. Thus, the standard for selecting materials is also very important, especially during the production and processing of silicone products by manufacturers. One can identify the quality issues of a silicone seal ring by the following points!
The quality of raw materials, followed by the qualification of the vulcanizing agents added to the mixing rubber raw materials, is crucial. The primary reason for the aging of silicone products is often attributed to the raw materials, such as exposure to light, heat, oxygen, and other environmental factors. Additionally, the cause of dimensional deviations in the vulcanization process, such as insufficient tightness in sealing, can be traced back to the product dimensions and the tolerance range of the mold size. For products with low pressure resistance and long-term active movement, the reasons can be found in the vulcanization temperature and time; the desired hardness and softness of the product can only be achieved under standard time and temperature conditions.
After a comprehensive analysis, it is determined that, excluding normal product usage, environmental factors, and inherent product quality, issues can be traced back to various causes. The primary reason for the occurrence of aging symptoms is still attributed to the production process and excessive wear and tear from overuse.
