Power failure：

• If power is not available, check if the power cord is damaged or the plug is loose, and repair or replace the corresponding parts.

• Check the power switch for proper operation; repair or replace if issues are found.

Motor failure：

• If the motor does not start, check if the motor winding is open circuit or short circuit, and use a multimeter or similar tools for detection.

• Inspect the motor's starting capacitor for damage and replace it promptly.

Line Failure：

• Inspect for any open circuits, short circuits, or poor contacts, and investigate and repair each issue individually.

• Check the connections of the control lines to ensure proper signal transmission.

ControllerFault：

• If the controller displays an abnormality or fails to respond, try restarting the device to see if it can return to normal operation.

• If the issue persists, it may be necessary to contact a professional to inspect or replace the controller.

Sensor Failure：

• If the inductive function of the feeding machine is malfunctioning, check if the sensor is obstructed, damaged, or improperly positioned, and make the necessary adjustments or replacements.

Electromagnetic Interference：

• Eliminate potential electromagnetic interference sources in the vicinity, or shield the equipment accordingly.