2205 Flange Blank

Flange, also known as a flange disc or boss, is a component used for connecting shafts or for joining pipe ends. It is also used on equipment for connecting two devices, such as a reducer flange. A flange connection or flange joint refers to a removable connection formed by the combination of a flange, a gasket, and bolts. Pipe flanges are flanges used in piping installations, while on equipment, they refer to the equipment's inlet and outlet flanges. Flanges have holes, and bolts secure them tightly. They are sealed with a gasket. Flanges come in threaded (screwed) connections,焊接 (welded) flanges, and clamp flanges. Flanges are always used in pairs; low-pressure pipelines can use threaded flanges, while those above 4 kg of pressure use焊接 flanges. Two flange discs are joined with a sealing pad and then bolted together. Flanges of different pressures have different thicknesses and require different bolts. In the case of pumps and valves, when connected to pipes, these equipment components are also shaped to match the flange, and this connection is also called a flange connection. Any connection piece that uses bolts to connect two flat surfaces and is sealed is generally called a "flange," such as the connection of ventilation pipes. These types of components can be referred to as "flange-type components." However, such connections are only a part of a device, like the connection between a flange and a pump, so it's not appropriate to call the pump a "flange-type component." Smaller components like valves can be called "flange-type components."