Stainless Steel 321 Flange

Flange, also known as a flange disk or boss, is a component used for connecting shafts or for joining pipe ends. It is also used at equipment inlets and outlets, such as reducer flanges, for connecting two pieces of equipment. A flange connection or flange joint refers to a removable connection consisting of a flange, a gasket, and bolts, forming a combined sealing structure. Pipe flanges are those used in piping installations, while on equipment, they refer to the equipment's inlet and outlet flanges. Flanges have holes for bolts, which secure the two flanges together, and are sealed with a gasket. Flanges come in threaded (screwed) connections,焊接 (welded) flanges, and clamp flanges. Flanges are always used in pairs; low-pressure pipelines can use threaded flanges, while those above 4 kg pressure require焊接 flanges. Two flange disks are joined with a sealing pad and then bolted together. Flange thickness varies with pressure, as do the bolts used. In the case of pumps and valves, when connected to pipes, these equipment components are also shaped like flanges, known as flange connections. Any connection piece that uses bolts to connect two flat surfaces and is sealed is generally called a "flange," such as in ventilation pipe connections. Such components can be referred to as "flange-type parts." However, this type of connection is only a part of a device, like the connection between a flange and a pump, so it's not appropriate to call the pump a "flange-type part." Smaller components like valves can be called "flange-type parts."