316L Weld Neck Flange

Flange, also known as a flange disk or boss, is a component used for connecting shafts or for joining pipe ends. It is also used at equipment inlets and outlets, such as reducer flanges, for connecting two pieces of equipment. A flange connection or flange joint refers to a removable connection consisting of a flange, a gasket, and bolts, all interconnected to form a sealing assembly. Pipe flanges are those used in piping installations, while equipment flanges refer to the inlets and outlets of equipment. Flanges have holes and bolts that secure them tightly together, with gaskets used for sealing between flanges. Flanges come in threaded (screwed) connections,焊接 (welded) flanges, and clamp flanges. Flanges are always used in pairs; low-pressure pipelines can use threaded flanges, while those above 4 kg of pressure require welding flanges. Two flange disks are joined with a sealing gasket and then bolted together. Flange thickness and bolt types vary with pressure ratings. Equipment like pumps and valves, when connected to pipes, have corresponding flange shapes, also known as flange connections. Any connection piece that uses bolts to connect two flat surfaces and is sealed is generally called a "flange," such as in ventilation pipe connections. Such components can be referred to as "flange-type parts." However, such connections are only a part of a device, like the connection between a flange and a pump, so it's not appropriate to call the pump a "flange-type part." Smaller items like valves can be called "flange-type parts."