How to Install Welding Robot Workholding Jigs? Let the Welding Robot Manufacturer Give You a Simple Introduction Below.
1. Prior to installation, the robot manufacturer will equip the fixture. We recommend choosing the original factory fixture for convenience in assigning personnel for installation and debugging, which also facilitates future maintenance and repairs.
When installing a portion of the welding fixture, it is necessary to secure it with bolts from the original factory equipment to the manipulator's support bracket.
3. Once the welding fixture is installed, the requirement is to secure the welding piece onto it. The fixture will clamp the workpiece. During programming, it is necessary to set appropriate parameters for the fixture to clamp according to the specifications of the welding piece. We must pay attention that when clamping thinner workpieces, the clamping force should be limited, and the contact area of the pressure head should be increased to achieve an appropriate level of clamping.4. After the robotic welding is completed on one side, the fixed pin is released, the fixture is rotated, and then re-fastened. The operator needs to perform teaching programming. Typically, the positioning machine and the welding robot perform asynchronous welding; after one side of the workpiece is焊接 finished, the positioning machine flips the workpiece to焊接 the other side.
Upon completion of welding, the fixture will release the clamped parts. After removing the workpiece, the fixture can be returned to its original position and undergo routine maintenance and protection.
Here's a summary of the basic knowledge about welding fixture installation. We hope it's helpful to you. Feel free to contact us with any questions. Follow our official website for more insights into welding robots.
