Technical Specifications:
(1) Appearance: Purple-red liquid
(2) Gel Time (25℃): 14-24 min
(3) Cobalt Content: 0.4%-0.5%
Usage:
This product is suitable for exporting to the EU market, where there are high environmental protection requirements for products such as buttons and storage tanks. After curing, the products appear white or show the natural color of the resin. During formal application, the appropriate amount of accelerator should be determined based on the site temperature and required process conditions, and adjusted through pre-testing.
Our factory also produces accelerator ET (with 1% cobalt content) for customer selection.
Promoters and peroxide initiators can cause a violent explosive reaction upon direct contact. When in use, never add both to the resin simultaneously to avoid adverse consequences.
Packaging: 180Kg galvanized steel drums, 20Kg plastic buckets.
Storage and Transportation:
(1) Store in a cool, shaded area below 25 degrees Celsius for a shelf life of 6 months.
(2) This product is flammable. Transportation is handled according to the GB190 regulations for flammable hazardous materials. During transportation, it must not be exposed to direct sunlight and should be avoided from impacts.
The samples for the following tests were provided and confirmed by the applicant: Promoter
SGS Work Number: SP13-029371-SH
Sample Receipt Date: October 10, 2013
Test Period: October 10, 2013 - October 14, 2013
Test Requirements: According to Customer Specifications
Testing Method: Refer to ZEK-01.1-08 and subsequent instructions, utilizing GC-MS for analysis.
Test Results: Notes:
（1）1mg/kg=0.0001%
(2) MDL = Method Detection Limit
(3) ND = "Not Detected (<MDL)"
(4) "-" "=" Not Specified
