Electric reel machines often suffer from corrosion in high-temperature, high-humidity environments within greenhouses. This necessitates thorough pre-use inspections and post-use maintenance.

Maintenance Tips: Here are a few little tricks to share with you all.

1. The motor can be operated at no load to confirm that the rotating parts are free of rust and seizing; inspect the lubrication oil in the gear box for proper calibration; examine the drive shaft and load components (cover)

Ensure that there are no obstructions or changes in the rotation position of the solar film or plastic film; only when all these are correct may the motor be started and used.

2. Electric Control Box. It is a cabinet integrated with various electrical switches, indicator lights, control transformers, contactors, and electrical connection wires. Proper use of various switches and instruments,

Gauges can significantly enhance the efficiency of controlling various equipment. However, these switches, instruments, and gauges are all prone to damage from moisture and dust, requiring operation and use in a dry and clean environment.

Therefore, the cabinet must be located in an indoor environment that is well-ventilated, dry, and easy to operate. Before use, ensure that the cabinet is properly grounded. Check the insulation of the input and output power cables.

Are there any signs of damage or broken/corroded connections? Is the input voltage within the operating range (check voltage and current meters when the switch is closed). Only when all these are confirmed to be correct, can we proceed formally.

Utilize.

3. Electric Contact Thermometer. When using this instrument, be mindful that it is fragile and should be handled with both hands. The top knob features a fixing bolt and magnet. After each use,

Always ensure that the fixing bolts are tightened to prevent the adjustment knob from being lost. The unit can be operated with power on, allowing you to adjust the indoor temperature scale as needed. When the indoor temperature reaches the adjusted setting,

When temperatures are required, the alarm system activates immediately.

Above is the sharing of maintenance tips for electric roll film machines. If you have any other questions or needs, please feel free to call!