The maintenance and cleaning methods for Nantong roller shutters are as follows:

One, a professional inspection of the rolling shutter is conducted annually.

Over time, debris may accumulate in the sealing track of rolling shutter doors. Using a brush for cleaning can make their opening and closing more effortless.

Three, try to prevent mechanical collisions with the door panels to avoid affecting the normal operation and aesthetics of the door.

Four, the surface of roller shutters can be cleaned with a neutral detergent and a soft cleaning cloth, diluted with water, to prevent dirt accumulation on the door panels, thereby ensuring the normal operation of the roller shutters.

Five, avoid frequent use and operation of the tubular motor to prevent excessive heating. If the motor fails to run, it's often due to the internal thermal protector activating. Allow it to cool for about 15 minutes before it can operate normally again.

Ensure electrical components are insulated; roller shutters should not be used in excessively damp conditions.