The dispersing emulsifier shears, disperses, and impacts materials through the high-speed rotation of the homogenizing head connected to the engine. This process makes the material finer and allows oil and water to blend together. It is widely used in many cream products that require a dispersing emulsifier, such as cosmetics, shower gels, sunscreens, and others like sauces, juices. In the food industry, industrial ointments. The dispersing emulsifier will be used in petrochemicals, paints, coatings, inks, and more. Important safety precautions when using the dispersing emulsifier.

Each time the dispersing emulsifier is started, the bearing water jacket recirculation water should be turned on first, and it is strictly forbidden to operate it dry.

During shift startup, the dispersing emulsifier should be manually operated first before starting to prevent the motor from being damaged due to excessive starting load. The manual operation test run should not exceed 20 seconds.

During operation, it is strictly forbidden to have water interruption at both the bearing water jacket and the outer casing.

During the work process, it is strictly forbidden to break or disperse the material of the emulsifying machine to prevent the emulsion from remaining and heating up, thereby avoiding accidents.

Upon completion of production, the dispersing emulsifier must be thoroughly rinsed with water, and it is strictly prohibited to start the dispersing emulsifier under load.

Before disassembling or repairing the emulsifying machine, the material inside the emulsion chamber must be cleaned.

To ensure production safety and prevent human errors, during the continuous emulsification process and control, the equipment must be equipped with safety measures such as automatic alarms and shutdowns for parameters like over-temperature, over-pressure, cutoff, water interruption, and abnormal fluctuations in current.

Lubrication, Maintenance, and Repair:

1. The dispersing emulsifier undergoes rigorous dynamic balance checks, water jacket pressure checks, and full machine operation tests before leaving the factory. However, after long-distance transportation, the user should perform the following checks before the first use: (1) Inspect all bolts for looseness and add lubricating grease to the bearings. (2) Manually rotate the coupling to check for any binding, and confirm there are no issues before installing and adjusting for operation.

2. The bearings of the dispersing emulsifying machine should be lubricated regularly, with lubricating grease added every half month. It is recommended to use lithium-based grease or molybdenum disulfide grease.

Users should perform maintenance on the equipment every six months after continuous operation, checking that the bearings, stator, rotor, and connecting parts are intact.

During the work process, any malfunction in the equipment must be stopped immediately, and the machine can only be restarted after diagnosis and repair. Working while under the weather is strictly prohibited.