Performance characteristics of sintered plates:
The sintered plate filter cores feature a rigid wavy porous structure. The sintered plate has a thickness of approximately 4mm, creating a uniform pore size of about 3μm internally. Subsequently, a PTFE coating is filled into the gaps on the substrate surface via a special spraying process, forming micro-pores of 2~3μm.
2. The independent cavity sealing design ensures that even if there is a leak in the plastic sintered plate filter plate, there will be no large-scale dust emission and resultant environmental pollution.
The unique wavy design of our烧结板滤芯 increases the filtering area while reducing the footprint.
4. High Dust Removal Precision: Micron-level filtration pore size can effectively remove most dust particles larger than 1um, and can nearly eliminate dust particles larger than 0.5um.
5. Large Filtering Area: The corrugated design of the filter surface offers 3 to 6 times the filtering area of the same volume as a filter bag.
6. High self-cleaning ability: The rigid structure allows the reverse airflow to act more directly on the powdery substances adhered to the filter surface, without any buffer, resulting in a thorough dust removal effect.
7. Hydrophobic and Oleophobic: The sintered plate matrix is made of a variety of high-density polymer materials, with PTFE coating penetrating deep into the sintered plate matrix pores and forming a super-fine pore anti-adhesive structure, offering hydrophobic and oleophobic properties.
8. Strong Acid and Alkali Resistance: The special resin material can withstand long-term high-temperature corrosion by strong acids and alkalis.
9. Extended Service Life: With higher strength and toughness, it can withstand thousands of repeated impacts from high-pressure gases daily. Its wear resistance is over four times that of steel, along with strong acid and alkali resistance and an excellent self-cleaning effect, which enables the service life of the sintered plate to reach over 10 years.
10. Constant pressure, stable resistance; as the wave-shaped sintered plate filter core captures dust through the surface resin coating, its smooth surface makes it extremely difficult for dust to penetrate or remain. Even if some extremely fine dust particles may enter the cavity, they are immediately blown away by the set pulse compressed air flow. Therefore, clogging will not occur within the mother layer of the sintered plate filter cores.
