The sand-making machine, also known as an impact sand-making machine, is widely used in various sand production fields, such as cement, various ores, corundum, quartz stone, river pebbles, limestone, and calcite. With the development of society, there is a higher demand for the production efficiency of sand-making machines. So, how can we improve the production efficiency of sand-making machines?
It is widely known that sand-making machines require routine maintenance before production to ensure they are in good condition before being put into normal operation. During the actual production process, the efficiency of sand-making machines is related to the following factors:
The composition of the material: Often containing fine powder, which can easily be adsorbed during the conveying process, affecting the normal operation of the sand-making machine. Therefore, a sieve-out fine powder treatment must be performed on the material before sand-making.
2. Material Hardness: The higher the material's hardness, the greater the difficulty in making sand, and the lower the production capacity. Unless there are special requirements, the fineness of the material is set to medium-fine.
3. Material Viscosity: The higher the material's viscosity, the stronger its adhesion, making it easier to stick to the inner wall. If not cleaned promptly, it can either reduce the efficiency of the sand-making machine or, in severe cases, affect its normal operation. Therefore, viscosity should be considered when selecting materials.
Material humidity: Materials with high water content have higher humidity, which not only easily adhere to the inner wall of the sand-making machine but also tend to clog the feed conveying pipe, significantly reducing the sand-making capacity. It is crucial to strictly control the material humidity and, if necessary, dry the materials through sun and wind exposure. The above all pertain to the impact of the material itself on the sand-making machine's production efficiency. However, the model and performance of the sand-making machine are the key factors affecting its production capacity. Therefore, choosing the right sand-making equipment is vital.
