Exhaust Muffler for Emptying Air

One: Application and Product Features of Exhaust Muffler for Air Discharge

The Exhaust Steam Muffler for Air Discharge is primarily used for effectively silencing high-temperature and high-pressure steam exhaust from safety valves, PCV valves, and exhaust valves in industries such as power, chemical, and metallurgy.

For boiler safety valves and exhaust valves, they can be regarded as a part of the pipeline. After acoustic treatment inside, they can reduce the generation and transmission of noise, achieving an acoustic attenuation of 20 to 30 decibels (A-weighted) at the outlet. Correspondingly, the loudness is reduced by more than 60%, resulting in a significant subjective effect. When designing a noise attenuator for the exhaust of safety valves, the following three aspects should be considered:

1. After noise reduction, excessive noise should be avoided, with the noise reduction level meeting the requirements of the "Industrial Enterprise Noise Hygiene Standard."

2. Mufflers should be rust-proof, clog-resistant, and capable of withstanding high temperatures, pressures, and air flow.

3. The exhaust volume and blockage ratio of the muffler should be compatible with the smooth exhaust of the safety valve steam flow.

Exhaust mufflers, saturated steam exhaust mufflers, compressed gas vent mufflers, F-type vent exhaust mufflers. Our TA series mufflers meet the noise reduction and silencing requirements for various sizes of boilers discharging steam into the atmosphere, safety valve steam discharge, and the intake of boiler fans. They are also widely used in the steam discharge of boilers in the petrochemical, chemical, metallurgical, textile, and other industries, as well as for other gases.

Silenced exhaust emissions, meeting industrial noise standards. Features of the exhaust gas silencer for air discharge:

1. Utilizes multi-stage sound attenuation, with a high noise reduction capacity; the exhaust muffler can reach 35~40 decibels, while the venting muffler can achieve 25~30 decibels.

2. Compact, lightweight, easy to install, and maintain.

3. The TA series features a cylinder made of high-quality stainless steel or carbon steel, offering sufficient strength and corrosion resistance.

4. Capable of independently fixing and absorbing the vertical and horizontal thermal displacement of exhaust steam pipes, ensuring that the pipes are not subjected to additional loads due to the installation of silencers, thereby guaranteeing the safety of the exhaust steam pipes under thermal operation. Overheated steam exhaust silencer, saturated steam exhaust silencer, compressed gas vent silencer, F-type vent exhaust silencer.

Section 2: Principle of Exhaust Gas Muffler for Air Discharge

The safety door silencer utilizes the principle of perforated jet and resistance to reduce noise. It replaces the micro-porous plate design with a large-porous capacity control flow, ensuring the smooth exhaust of the safety door. It employs multi-level perforation for sound absorption and combines it with the resistive noise reduction principle. This allows steam sound waves to enter the countless small holes of the porous sound-absorbing material, exciting molecular vibrations in the porous material. This transforms the sound energy into heat as it overcomes frictional resistance and viscosity, achieving an ideal noise reduction effect while ensuring the smooth expulsion of steam.

Section 3: Ordering and Selection of Exhaust Muffler for Empty Carriage Discharge

When ordering mufflers, the following information is required:

(1) Safety valve steam discharge rate (T/h), lift pressure, temperature.

(2) Exhaust pipe outer diameter, wall thickness.

(3) The structure can be selected as either the perforated type or the anti-spray resistance composite type. Generally, users opt for the composite muffler, which offers excellent sound absorption; the internal material is made of stainless steel, while the shell material is carbon steel. The inlet can be chosen in either welding or flanged connection; the support legs can be either leg-type or ear-type structures.

Four, Exhaust Muffler Specifications (for temperatures up to 300 degrees, pressure up to 6.4 Mpa)

TB Type Exhaust Muffler, TB indicating Muffler with Soundproofing Enclosure (Composite), filled with sound-absorbing cotton. Gas enters from the bottom inlet and exits from the top. Due to the sound-absorbing cotton filling, it is suitable for pressures up to 6.4 Mpa; otherwise, the filling may be blown out. The housing is made of carbon steel and suitable for temperatures up to 300 degrees.

TB-1.6-10000/57 Model Meaning: TB stands for Compound Exhaust Muffler, 57 indicates the interface outer diameter is 57mm, and 1000 represents the exhaust volume is 1000M3/H.