Tubular Cool Oil Cooler Utility Model Patent∶ZL 2014 2 0456485.0
One. Application and Features∶
（1Usage
Turbines, fans, coal millers, pumps, and marine propulsion systems in industrial and mining enterprises all require oil coolers for the lubrication of large and medium-sized machinery. Based on the strengths of similar products, our company has conducted extensive experiments on the vibration of the oil-side laminar flow in heat exchange tubes, successfully developing a new type of tubular oil cooler.
（2Product Structure and Working Principle
The tube-type oil cooler operates with the oil flowing through the shell side and water through the tube side. The heat transfer coefficient on the oil side outside the tube is [insert specific coefficient value here] times that of the inside tube side.120-10The thermal resistance is primarily on the oil side. This equipment replaces the traditional arch baffles with swirl guides, with the main principle being that the cooling oil, after entering the shell of the cooler through the oil pump, is directed to rotate by the swirl guides. As it rotates, the oil washes along the circumference of the pipes. The structural parameters of the pipes are the result of optimized selection through multiple comparative tests, offering excellent performance, safety, and reliability, making it an ideal auxiliary equipment for steam turbine units.
（3Product Features
Tubular oil coolers have the following advantages compared to other types of coolers:∶
1. High thermal efficiency is a feature of the plate-type oil cooler.2-3Multiple
2.Tight construction∶Its compactness is comparable to plate heat exchangers.1-2Multiple;
3.Low oil resistance due to the use of swirl guide plates, with oil entering as tangential flow, which is conducive to fluid operation.
4.Long service life, easy installation and maintenance∶The heat exchanger tubes have minimal thermal expansion stress, thus avoiding common issues like cracking and leakage. Moreover, their shell-and-tube design facilitates easy installation and maintenance.
II. Product Series Performance and Technical Specifications
Condensing Turbine Coolant Performance and Specifications
Section 3: Product Dimensions∶
Section 4: Product Selection∶
1Target Product Users
This product series is specifically designed for condensing steam turbines in power plants and various heating steam turbines, and can also be used for the lubrication and cooling of power oils in industrial and mining enterprises, such as boiler feed pumps, coal mills, and blowers and exhaust fans.
2Product Model Pattern....
3Selection Guidelines
A wide variety of turbine types are designed by domestic and international turbine manufacturers. Based on extensive data collection, our company has compiled various ordering and selection schemes for turbine oil coolers, as shown in the table. If customers have special usage requirements, please contact our company. V. Installation of the oil cooler∶
1Preparation before installation
Chilled oil cooler is pre-tested before shipment.0.6mpaHydrostatic test required. However, prior to installation, the provisions of the "Technical Code for Construction and Acceptance of Electric Power Projects (Turbine Generator Set Chapter)" should be followed.∶“Cold ink side should be worked at pressure1.5Twice the hydrostatic test pressure retention5No leakage for minutes.
2Coolant Cooler Installation∶
（1The cooler is supported on pre-prepared brackets and can reliably meet its dynamic and static load requirements.
（2Due to the change from an arch-shaped baffle to a swirl plate, the cold oil cooler's oil inlet should be oriented in the clockwise direction; do not install it in reverse.
