TangshanLittongCement Pipe FactoryTelling you about the classification of concrete cement pipes:

One: Used for conveying fluids such as water, oil, and gas.

Concrete pipes are categorized into four types: plain concrete pipes, reinforced concrete pipes, prestressed concrete pipes, and self-compacting reinforced concrete pipes.

Section 3: Concrete pipes are categorized by their internal diameters, including small-diameter pipes (internal diameter...).Our pipes are categorized into small diameter pipes (below 400mm), medium diameter pipes (400mm to 1400mm), and large diameter pipes (above 1400mm). Depending on the water pressure bearing capacity, they can be classified as low-pressure pipes and pressure pipes. The working pressure of pressure pipes typically ranges from 0.4 to 1.2 MPa.

In comparison to steel pipes, concrete pipes can be further categorized based on the type of joint, including flat-end pipes, socket-and-spigot pipes, and bell-and-spigot pipes.

Its interface forms include cement mortar coating joints, wire mesh cement mortar coating joints, cement mortar socket and spigot joints, and rubber ring socket and spigot joints.
Reinforced concrete pipe diameterThe wall thickness of the 1000 pipes is:
I Level = 80MM; II Level = 100MM;
2. F-B Type II Reinforced Concrete Pipe with Steel Flange = 100MM diameter

3. Flexible socket and spigot reinforced concrete drainage pipes: Grade II = 100MM, Grade III = 100MM.

Concrete Drain Pipe Service Hotline:15027685199