JCH-100KW-AC400V-RCD 100KW RCD Load
I. Product Overview
Jin ChuhanCommunication NonlinearityBuilt-in resistive and capacitive loads，IsUPS、Inverter、Variable Frequency Drives and AC Variable Frequency Power SuppliesEssential testing equipment. This product is suitable for load testing and aging testing of electrical electronic products.
II. Reference Standards
QC/T 895-2011 Conductive On-board Charger for Electric Vehicles
2. YD/T1095-2008 Uninterruptible Power Supply (UPS) for Telecommunication Use
3. GB 19212.1-2008 Part 1: Safety of Power Supplies, Reactors, and Similar Products - General Requirements
4. General Rules for Low-Voltage Switching and Control Equipment, GB/T 14048.1-2000
5. Marine Diesel Generator Set, GB/T 13032-2010
6. GB 5226.1-2002 Mechanical Safety - Part 1 of Mechanical Electrical Equipment: General Technical Conditions
7. GJB 235-87 General Technical Conditions for Industrial and Medium Frequency Mobile Load
Section 3: Technical Specifications
Equipment Technical Specifications | |
Name | Communication Load |
Model | JCH-100KW-AC400-RCD |
Rated Voltage | AC400V(L-N:AC230V) |
Rated Power | 100KW(PF=1.0),100KVA(0.8≦PF＜1.0) |
Power Factor | PF:0.8～1.0 |
Ratio of Volume: W:UF | 1:2 |
Power Rating | Three-phase independent: RPhase: Total of 10 steps, each step 3.3KW, fine step 3.3KW (PF=1.0) SStep: Total of 10 steps, each step 3.3KW, fine step of 3.3KW (PF=1.0) TPhase: Total of 10 steps, each step 3.3KW, fine step 3.3KW (PF=1.0) During three-phase synchronization: 10 steps, each step 10KW, fine step 10KW (PF=1.0) |
Loading resolution | Step Increment: 10KW |
Load Accuracy | ±5% |
Work Power Supply | Three-phase power supply |
Wiring method | Anderson Terminal U V W N PE |
Control Method | Local Circuit Breaker |
Explicit method | N/A |
Protection Grade | IP20(Indoor use suitable |
Fan Noise | 75Decibel |
Cooling Method | Forced Air Cooling: Left intake, right exhaust. |
Work Method | Continuous operation |
Protective Function | Overcurrent protection |
External Dimensions:Width x Depth x Height | Approx. Load Host Size: 800*W x 750*D x 1800*H mm (for reference only) |
Applicable Environmental Temperature | -10℃～+50℃ |
Mode of Transportation | 2 front swivel casters, 2 rear swivel casters. |
Relative Humidity Applicable | ≤95% |
Altitude | ≤2,500 meters |
