详情描述


Portable Safety Valve Calibration Bench

I. Features

The portable safety valve comprehensive calibration bench uses high-pressure air or nitrogen as the medium to test the sealing performance, lift pressure, and other parameters of various safety valves, assessing their pressure safety performance.

Section II: Typical Applications

Performance testing of safety valves for flanged, threaded, full-open/micro-open types, standard thickness/thinness flanged, domestic/imported, spring direct loading, power-assisted, and supplementary loading safety valves, ranging from DN15 to 200mm.

Equipment meets national standards and is suitable for performance testing and regular inspections of safety valves by quality supervision authorities, boiler inspection institutions, safety valve manufacturers, and users of safety valves.

Section 3: Technical Specifications

Host Technical Specifications

  1. Pressure Range: 0-32 MPa (optional: 0-10 MPa, 0-20 MPa, 0-30 MPa, 0-40 MPa)
  2. Test Medium: Air or Nitrogen
  3. Control Method: Manual Control
  4. Test Pressure Output: 1 channel
  5. Test Valve Bore Size: DN 15-150mm
  6. Pressure Control Accuracy: ≤±1% F.S.
  7. Pressure Measurement Accuracy: 0.4 Class Pressure Gauge (optional for higher pressure grades)
  8. Pressure Gauge Measurement Range (dual gauge verification): 0-25 MPa, two pieces (available for selection as needed)
  9. Clamping Method: Hydraulic Cylinder Clamping
  10. Clamping force output range: 0-20 tons.
  11. Sealing Method: O-ring / Threaded Seal
  12. Drive Gas Source: 5-8 bar, Rated Gas Consumption: 0.8 cubic meters per minute
  13. Compressed Air Quality Requirements: Filtration Precision: 15μm; Atmospheric Dew Point: 3℃; Oil Content (PPM): ≤5.0