- AllProduct Category
-
Construction Project Photo Gallery
Ventilated School Track & Silicon PU Basketball Court
Water-Based Asphalt Colorant
Water-based High Molecular Polymer
Water-Based Anti-Slip Pavement
Water-Based Non-Slip Color Coated Pavement Spray
Water-based SP Embossed Eco-Friendly Colored Pavement
Water-based SP Spray
Waterborne MMA
Aqueous EAU
Luminescent Road at Limi Beauty Street
Cold Mixed Colored Asphalt
Chipped and Peeling Old Colored Pavement Repair
Colorful Ceramic Bead Anti-Slip Pavement and Adhesive Stone
Color Asphalt Binder and Special Pigments
Color Asphalt
Colorful EPDM Granules and Plastic Tracks
Painted Pavement
LML High-Performance Abrasion-Resistant Coating by Hand Application


详情描述
LML Coated Color Asphalt Pavement
Utilizing colored pavement materials, this is a water-based, two-component, highly wear-resistant road anti-slip material. It is non-toxic and free of irritant odors, and has passed the LEED environmental protection certification. The application method is embedded spraying.
The coating material consists of three layers: base, middle, and top, applied in three coats, with an average thickness of 0.8-1.1MM.
Drying Time: Open within 1-2 hours at around 25°C. It is recommended to extend the curing time for the colored pavement to achieve the best results.
Technical Specifications:
This product has been tested by the Ministry of Transport's Inspection Center and the China Construction Department's Central Institute of Construction, and its film appearance, water resistance, low-temperature crack resistance, skid resistance, and environmental protection requirements meet the relevant provisions of the traffic industry standard JT/T712-208 "Road Anti-Slip Coating" for cold-sprayed coatings.
Environmental Protection: VOC Content ≤ 25g/L
Anti-slip Property: High Anti-slip (BPN≥70)
Optimal Construction Temperature: 10°C - 35°C
Freezing Point: 0°C.
Coating Application Process:
1. Closed construction area.
2. Road sweeping and cleaning
3. Mark reference lines according to the design drawings and position the lines.
4. Surrounding areas are粘贴 with shielding tape.
5. Basecoat mixing and spraying
6. Middle coat mixing and spraying (the second coat must be fully dried before proceeding to the next step).
7. Surface Mixing, Spraying
8. Custom logo coloring and protective film spraying.
9. Open Traffic.
Product Features: Easy installation, excellent durability, eco-friendly, resistant to chemical corrosion, stable color, good anti-slip performance. The product boasts unique design, rich colors, superior performance, green environmental protection, and the ability to beautify the environment. With high solar reflectivity, it can reduce road radiant heat, mitigate the urban heat island effect, and effectively save energy.
询价单












