- AllProduct Category
-
Construction Project Photo Gallery
Ventilated School Track & Silicon PU Basketball Court
Water-Based Asphalt Colorant
Water-based High Molecular Polymer
Water-Based Anti-Slip Pavement
Water-Based Non-Slip Color Coated Pavement Spray
Water-based SP Embossed Eco-Friendly Colored Pavement
Water-based SP Spray
Waterborne MMA
Aqueous EAU
Luminescent Road at Limi Beauty Street
Cold Mixed Colored Asphalt
Chipped and Peeling Old Colored Pavement Repair
Colorful Ceramic Bead Anti-Slip Pavement and Adhesive Stone
Color Asphalt Binder and Special Pigments
Color Asphalt
Colorful EPDM Granules and Plastic Tracks
Painted Pavement
LML High-Performance Abrasion-Resistant Coating by Hand Application


详情描述
LML Colored Asphalt Road Spraying
Utilizing water-based, two-component, high-wear road anti-slip materials with color road surface, odorless and non-irritating, certified by LEED environmental protection, applied through embedded spraying method.
The coating material consists of three layers: base, middle, and top, each applied twice, with an average thickness of 0.8-1.1MM.
Drying Time: Open after 1-2 hours of drying at around 25°C. It is recommended to extend the curing time for the colored pavement to achieve the best results.
Technical Specifications:
This product has been tested by the Ministry of Transport's Inspection Center and the China Construction Department's Central Institute of Construction, and its film appearance, water resistance, low-temperature crack resistance, skid resistance, and environmental protection requirements meet the relevant provisions of the traffic industry standard JT/T712-2008 "Road Anti-Slip Coating" for cold-coated coatings.
Environmental Protection: VOC Content ≤ 25g/L
Anti-slip Property: High Anti-slip (BPN≥70)
Optimal Construction Temperature: 10°C - 35°C
Freezing Point: 0°C.
Coating Application Process:
1. Off-limits construction area
2. Road sweeping and cleaning
3. Mark the datum lines according to the design drawings and position the lines.
4. Surroundings are properly lined with shielding tape.
5. Bottom coat mixing and spraying
6. Intermediate coating mixing and spraying (the second coat must be fully dried before proceeding to the next step).
7. Surface Mixing, Spraying
8. Custom logo painting, protective film spraying.
9. Open traffic.
Product Features: Easy to install, durable, eco-friendly, resistant to chemical corrosion, color stable, and excellent anti-slip performance. The product boasts unique design, rich colors, superior performance, green environmental protection, and the ability to beautify the environment. With high reflectivity to sunlight, it reduces road radiation heat, mitigates the urban heat island effect, and effectively saves energy.
询价单












