Slanting Iron Pad: The slanting iron is also known as a slanting iron pad.

Angle iron aliases: Sloped iron, steel angle iron, forgings angle iron, wedge iron, angle washer, steel angle washer, forging angle washer, cast iron angle iron, cast iron angle washer, explosion-proof angle iron, safety angle iron, explosion-proof angle washer, safety angle washer, matched angle washers, etc.

Are Slanting Wedge Irons Necessary for Equipment Installation?

No, there are many types of shims, including flat and slanted ones. The slanted shim is just one type among them. Flat shims can only slightly increase the height of the equipment, while slanted shims make it easier to level and align the equipment and ensure stability. However, the installation of equipment must use shims, and no more than 5 shims should be used per set.

Tilted Iron Shoe: The slope of the tilted iron shoe

The result is a slope of 1/10, meaning the thickness at both ends of the levelled iron is reduced, making it suitable for a triangular cross-section.

If the top thickness is not zero, a portion of the inclined surface of the shims will be flat.

Slanting Iron: How much does the slanting iron standard extend?

Iron washers should be placed in areas of concentrated load: generally on both sides of the anchor bolts, at the corners of the platform, with a distance of -.

Each layer of shims should not exceed 3 pieces, and should not total more than 5. Only one set of diagonal shims (counted as 2 pieces) is allowed, and the overlap of the two shims should not exceed 25% of the shim area.