详情描述

PP Ducting

PP ductwork is a plastic pipe made by extrusion molding from polypropylene (PP) resin. Its core value lies in utilizing the inherent excellent chemical resistance of PP material to address the issues of traditional metal ducts (such as galvanized iron sheet, stainless steel) which are prone to rust, perforation, and have a short lifespan in corrosive environments.

PP pipe can withstand corrosion from most acids, bases, and organic solvents (such asHydrochloric AcidSulfuric AcidNitric Acid、Sodium HydroxideAlcohols, etc.), offering a significantly longer service life than metal pipes, and is particularly suitable for environments such as chemical industries, electroplating, and laboratories. The density of PP material is much lower than that of metals, making PP ductwork extremely lightweight. This facilitates easier transportation, handling, and installation, effectively reducing installation costs and labor intensity. The interior wall is smooth with minimal friction resistance. The interior of PP pipes is extremely smooth, which prevents dust from adhering and reduces fluid resistance. This means that with the same power of a fan, a greater exhaust volume can be achieved, or the same air volume can be achieved with a smaller fan power, resulting in greater energy efficiency.

PP material is easy to connect with heat melting welding, featuring high strength at the welding points, excellent sealing, and almost seamless appearance. Specialized flanges are also available for connection. Repair and replacement are very convenient in case of local damage.

Section 3: Main Types

According to structure and application, PP ducts are mainly categorized into:

PP Round Duct (Straight Pipe)

The most common form is circular cross-section, with specifications ranging from several tens of millimeters to over a thousand millimeters. Excellent aerodynamic performance makes it the most frequently used type.

PP Square Duct (Rectangular Duct)

When installation space height is limited, rectangular ducts are used to maximize space utilization.

PP Reducing Fitting/Reduced Bending Fitting

Used for connecting ventilation pipes of different diameters.

PP Elbow/Bend Tube

Used to alter the direction of ventilation ducts, commonly available in 90° and 45° elbows.

PP Tee/Four-way Tee

Bends or junctions for ventilation ducts.

PP Air Valve: Used for adjusting the air volume in ventilation systems.

Four: Connection Methods

Hot Melt Welding (most commonly used):

Utilize specialized PP welding torch and rods to heat and melt the pipe material and fittings together. The connection boasts high strength and excellent sealing, almost becoming a single unit.

Flange Connection:

Welded PP flange at the pipe end, then secured the two flanges together with bolts, with a sealing gasket in between. Easy for disassembly and maintenance.

Sleeve and socket joint

For small-diameter pipes, socket-and-spigot joints can be used (with PP-specific adhesive).

In summary, PP ductwork is the "expert" for tackling the challenges of corrosive gas transmission. It excels in medium and low-temperature, highly corrosive conditions, and has become the standard ventilation pipeline material for industries like chemicals and laboratories, thanks to its lightweight, corrosion-resistant, and energy-saving features. However, when selecting, it is crucial to pay close attention to its temperature resistance limit and outdoor aging resistance issues.